Replaced the defrost heater and thermostat. Accessing these two items required removing most of the components in the freezer, which was made more difficult because of limited space in the side-by-side unit. The repair was quite easy after accessing and removing the wiring harness containing the aforementioned items. Tools required also included a multi-meter, soldering gun, flux, solder, wire cutters and strippers, shrink tube and heat gun. I also used a wash rag as a siphon in the drainage tray by letting a portion of the rag hang below the tray. This way the water stays inside the freezer instead of under the fridge and can be caught or cleaned up with a towel.