How to Troubleshoot & Replace Lg AP4438292 / 5001DD4001A Dishwasher Installation Hardware Kit

Thanks to LG NOT sending the parts THEY say are included with the dishwasher, I had to buy them in order to install the appliance. I sure hope the LG appliance performs better than their customer service. Very simple fix....bought the EXACT items needed from AppliancePartsPros.com and in just a matter of two days, had the parts needed. Amazing! Excellent experience. The fix was attaching the brackets to the cabinet and screwing it to the countertop. Also just popping the screw covers right in place. 

I ordered the brackets that hold the dishwasher to the counter top. I went to Lowes, Home Depot and neither of them had them nor did they want to help me locate them through their appliance depart.. I went on line and found them at parts pros and at a great price. I ordered them and in 2 days I had them at my door. They were the right parts the first time. I will use parts pros when I need another part for any of my appliances. Scott 

Checked circuit breaker to d/w first. Good. Went to website to see no power issues. Most all of them mentioned the noise filter being the problem. Removed filter from machine and found the corner melted where fuse is located. Ordered new filter, installed, and now have power to switches. All the information I found on the website really made this a easy job to get done. 

Replaced broken cable. Did the other side too since that one was fraying. I needed a couple of extra anchoring brackets to screw everything down afterwards, too. 

My husband installed it quickly. I put the silverware basket in it. ? 

Ordered new clips to use on top instead. New clips were much better. 

By diagram enclosed in order. 

Found the part easily on line. Delivered faster than expected. Needed to position dishwasher in slot under counter, attach clips, drill guide holes, mount clips with screws and snap off excess tabs. 

I cut about 3/8 of an inch in length and sliced about 1/4 inch off placed it into the open end of hose which brought it down to 1/8 inch opening and placed it onto the nipple protruding from the top and secured with the clamp. It worked I believe this is a breather tube the black hose. 

Replaced with new clips, no problem.