How to Troubleshoot & Replace Lg AP5325806 / AEQ72909603 Ice Maker Assembly

Started by removing both drawers,, Then crawled under draw to get to the part, removed the two front screws, put a small flat blade screwdriver to release the two side clips, once that was done you had two un clip the small wire harnis on the top, and than gently slide the old unit out, took about 5 minutes! than just repeating the process back words took another 5 minutes very simple job! Just by looking at the new part you will see what you have to do! 

The hardest part of the repair was figuring out what to replace. After seeing pictures of the ice maker in place, I could tell the sensor arm was broken because it was hanging down. Once I received the replacement unit, it was two screws, one connector, and the ice starting working again 

The hardest part was deciding to drop $200 for basically the icemaker. My ice maker had become "etched" with minerals and whatnot from the water resulting in the ice not fully dumping which caused water to spill over into the bin creating one huge ice block. Replaced the entire unit, 2 Philips screws, unplugged the power/data connection, and swapped. Couldn't have been easier. Now our ice maker works again!!! 

Installed a new water valve assembly and a new ice maker assembly. 

Replaced ice maker assembly. 

I replaced the ice maker, two screws, and an electrical connector. very easy. took more time to unload the freezer than switching out ice makers. 

Removed two phillips screws. Released plastic catch tabs with straight head Slid maker down and toward front of fridge. Released electrical connector tabs (a bit difficult). Installed new in reverse order. Part arrived on second business day. Took five minutes to install with the help of my 2 & 3.5 year old Correct part...fit perfect...works great I will order parts again from this vendor/site. 

Replaced ice maker. Very easy. 4 screws and a plug. Too easy Drill Sargent. Took 15 min from start to finish. 4hrs later I had ice in the box. 

Put in new water valve. It was too late. Ice maker was already broken. Got new ice maker. It works well. The videos were very helpful. Learning to do the water valve first was important. 

Fixed by replacing Ice maker