How to Troubleshoot & Replace Whirlpool AP6010716 / WP71003424 Oven Electronic Control Board

This couldn't have been simpler! Removed the glass panel by taking out 4 screws on the bottom that were accessed by opening the oven door. Lifted up, then pulled the panel forward, released one electrical connection, and the panel was disconnected and could be laid on a flat surface. Unscrewed the four nut screws on the old control board with a socket set (you could use a small wrench, but it would be tedious), un-clipped the wide ribbon connection ( had to pry it off very gently to avoid damage) and that was it! Simply reverse the process to install the new board. I'm thrilled- the display has been out for a couple of years- what a pleasure to have it back! 

I call AppliancePartsPros! They told me the part I needed, the video to watch to replace it, and reassurance that I could fix it! 

Replaced control board. Very easy to do! First time I ever worked on a appliance. 

Ordered a new oven control/clock. 

Replacement part. 

I replaced the control board part #WP71003424 

I changed the 3 switches showing door closed and it works fine. 

Replaced the Oven/Clock Control Board. Only took 12 minutes from start to finish. 

Followed instructions, everything was easy and worked great. 

The front panel of my Jenn-air JMW9530CAB oven came off very easily by removing 4 screws under the panel. I placed a lightweight chair on the open oven door to hold the panel and module while I worked on it. I easily removed the temperature control and clock LED module by snapping out and snapping in the connector cables from the old to the new module.