Stephen S North Kingstown , RI July 28, 2015 Appliance: KitchenAid Undercounter Dishwasher KUDS30IVSS3 Kitchen aid dishwasher control panel lights flashing and machine not operating I read online and the info that came with the dishwasher to conclude that the control panel probably shorted out. I had bought a 5 year extended warranty but it ran out 4 months prior. I contacted the local appliance store where I bought the dishwasher to find out how much the control panel and instillation would be. The appliance store stated the control panel with tax and shipping would be around $200 and the labor would be $145; thus the total to replace the control panel would be $345. So I decided to do it myself. I am not handy and was not 100% sure that replacing the control panel would solve the problem, however, Appliance Parts Pro has a good return policy and if it didn't solve my problem I could return the control panel and have the appliance store technician come out. Thus, I bought the control panel from APP for $140 (shipping $6.95) and it took me about 5-10 minutes to install (It did take about an hour or so to read online and diagnose the problem). The dishwsher works and I saved about $200. Read More... 4 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Socket Set
Harry H Murphy , NC September 29, 2018 Appliance: KitchenAid Undercounter Dishwasher KUDS30IVWH3 Converting white Kitchenaid dishwasher to stainless Ordered the Stainless Control Panel and Front cover to convert my White Kitchenaid dishwasher to match rest of kitchen appliances. Went perfect with the parts ordered from Appliance Parts Pros!!! Very easy to swap out parts. Make sure to pay attention to flat ribbon cable and align for number of pins per the stencil on the control panel PCB when connecting new console to your PCB. there is a 14 pin and 15 pin cable possibility. I had 14 pin and made sure to shift to correct side of connector to leave correct pin exposed on board. Requires Torx wrenches to remove fasteners Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Michael M N Miami Beach , FL August 15, 2015 Dishwasher wouldn't start lights kept blinking on control panel Removed cover panel, removed control panel and replaced old panel with new one. Only took two screws and one plug. Simplest repair ever. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Brian W Grafton , WI August 22, 2021 The control panel on our Kitchenaid dishwasher locked up, it appears the control panel failed. Replaced control panel. It was easy to remove 6 screws and disassemble/reassemble everything. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Edward S Morton , IL July 04, 2020 Appliance: Model KUDS301VSS4 Heavy and normal wash lights were blinking. Dishwasher would not run. Followed the procedure that was attached to the kickplate of the washer. Disconnected keyboard ribbon from control board, re-assembled and returned power to washer. Blinking lights disappeared, drain pump ran for 2 minutes indicating it was a bad keyboard, replaced keyboard. Ordered keyboard panel Saturday arrived Tuesday, Installed it and fixed the problem. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Dennis H Georgetown , TX February 04, 2017 Appliance: KitchenAid Undercounter Dishwasher KUDS30IVSS3 Dishwasher kept cutting out I located the problem and determined that the interlock switch on the latch could not stay closed because of a damaged control panel. In the meantime my wife was on the internet checking for a replacement and comparing costs. She located the control panel at Appliance Parts Pros, in stock and 20% less expensive than the nearest competitor. I ordered the part a Saturday, (non-business day), received a confirmation on Monday and received the part via Fed-Ex Wednesday morning. Now, that's great service! I have ordered from Appliance Parts Pros in the past and will continue to do so when the need arises. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Screwdrivers