John Ulrich M Mooresville , NC April 17, 2017 Appliance: Maytag Undercounter Dishwasher MDB7749SAW1 Corroded control panel cable Easy to remove control panel. 4 screws inside the door. a pair of plastic clips around the circuit board. unplug the ribbon cable mounted on the control panel. i didn't need the extra cable between the ribbon cable and the control board install align the pins at the bottom of the panel with holes at the top of the door be sure to not pinch the cable ribbon. install the screws. dishwasher works like new Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Dennis M Cascade , ID December 04, 2016 Would not turn on Replaced control panel Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers
Gerald R R Gig Harbor , WA August 10, 2016 Control panel lights went wacky and obviously it wouldn't work properly i'm thinking it was a power surge that did it in I bought a new panel from AppliancePartsPros and promptly put a screw through the ribbon cable while doing a too quick install . . . I was very surprised to find out that the part was under warranty for ANY reason! What a deal! A new part was delivered lickety split and now it works fine! I'll definitely be back! Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Matt E Lakewood , CO July 19, 2016 Dishwasher wouldn't run lights blinking Didn't want to guess what part to buy so I inquired on the website and appliancepartspros.com set me straight with a control panel and it was an easy install. Dishwasher runs like it should now. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
James A D Silverton , OR April 25, 2016 Appliance: Model INSIDE DOOR Maytag dishwasher panel control When I called they told me how to tell if old one was bad. I then order new part and it works like new. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Elmo I Summerville , SC January 23, 2016 Appliance: Maytag Undercounter Dishwasher MDB7749SBW2 Maytag dishwasher would not run bad control panel I took the old control panel off my dishwasher and saw that the cable was bad thus causing the buttons not to work properly. Sometimes there where lights on and sometimes they were all off and the dishwasher did not respond. I ordered the control panel on a Sunday evening had it by Wed. the install was just a matter of unscrewing all of the screws on the door panel, unscrewing the control panel, putting on the new control panel and putting all the screws back. Start to finish probably a 15-20 minute job and the dishwasher is now running like new. PS: I could not find the part listed on the website so I called the company, told the representative the part# and she found it for me. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
David R Green Cove Springs , FL December 11, 2015 The command panel on our maytag dishwasher stopped working I replaced the part that I ordered from your company. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers
Sharon D Glendora , CA November 16, 2015 Control panel not functioning properly Took apart the control panel, ordered a new one, and found it was not necessary to have taken it apart, as the 'part' was the entire control panel! Dishwasher works fine now. The only caveat was that the part listed as 'White' and not realizing it was the entire panel replacement, my black dishwasher now has a white control panel. Speed of delivery was excellent. My son actually did the repair so not sure of tools required. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Randy C Fort Myera , FL October 23, 2015 Controls not functioning properly Replace front control panel Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Kathy H Dayton , OH July 18, 2015 Control panel went bad I tore apart the dishwasher and forgot to take pictures because I really did not think I would be able to fix it. I received the part in less than 48 hours by FedEx. I stumbled my way through putting it back together with only one mistake. I screwed through the panel and luckily not through the electrical part of the panel. It was well worth fixing myself. I paid $95, Maytag wanted a minimum of $288 and a new dishwasher is $300 and up. Yeah me. Read More... Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Nut Drivers, Screwdrivers