How to Troubleshoot & Replace Whirlpool AP6021089 / WPW10411934 Infinite Switch Top Burner Control Switch (Rf)

I pulled out the range and removed the upper the back panel, checked the numbers on the control switches to ensure I was ordering the correct ones. Control switches arrived quick enough. Disconnected power to range, removed back panel, 10 phillips head screws, removed the knobs and two phillips head screws from the front of range. I had to lightly pry wiring harnesses connected to the switches off, but then just connect to new switch as continued the process through four harnesses. Then I just reinstalled everything in reverse order in witch I disassembled them. It was easy! 

We watched the youtube video on how to. Ordered the part---.Installed it. 

I ordered the element switch for each burner. They arrived in 1 day! The process to replace them was easy. Just remove the back cover of the stove. Find the ones not working, unplug them, plug in the new ones, and it's done. 

Replaced the infinite switch 

With your new control switch located behind the stove temperature knob. 

I repaired the front two burners by replacing the dual element switch on one and the infinite top burner switch on the single large front element. AppliancePartsPros expedited my order and I was able to complete this repair quickly. In order to remove the old switch, I had to use a large screwdriver to gain leverage underneath the plastic wire attachment and the old switch. I little patience paid off. Putting the new one on was easy. At first, replacing the original knobs proved tricky, but with a little bit of force, the stiffness of the the new connection gave way and it fit perfectly fine. Most of my time was spent cleaning underneath and around my freestanding range instead of the actual repair. 

Received part in 24 hours. Replaced it. Works as good as new.