Barry W Corona , CA January 13, 2017 Not getting dishes Followed video instructions and found out that screen was clogged, impeller broken, housing sliced open from bottom piece of impeller that had came off of broken impeller. within a few days new parts arrived and replaced and dishwasher is operating as good as new. Read More... 7 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Pliers, Screwdrivers
Lori S Mora , MN April 07, 2015 There was a very loud clunking noise during the washing process Process of elimination. Just started taking the housing apart. Found that this piece had come apart, thought of gluing back together but looked like the screw was broken off as well. Very inexpensive fix, and the DW humms like it was new. Great money saver for DIY projects. Thanks Appliance Parts Pros! Read More... 6 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Lawrence S Westlake , OH March 16, 2015 Appliance: Maytag Dishwasher MDB9100AWB Noisy dishwasher Bought a pump repair kit and then had to buy a discharge pump housing and a check ball. I could have used some other parts as some were brittle, but they were obsolete. The dishwasher runs quiet and seems to clean well. Read More... 3 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers
Gwendolyn S Hingham , MA October 10, 2015 Dish washer did a lousy job cleaning dishes due to a non rotating spinner at the bottom My son fixed it. Problem was one of the spinner pieces had worked itself loose and jammed the large arm from freely spinning. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Socket Set
Peter F Webster , NY February 08, 2015 Appliance: Model MAYTAG DISHWASHER Making a grinding/rattling noise Replaced the discharge housing. The plate on the bottom came off and was hitting the pump impeller. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Pliers, Screwdrivers
Sean M Saylorsburg , PA April 06, 2016 Appliance: Maytag Dishwasher MDB9100AWW The dishwasher was not cleaning the dishes and left soap throughout the inside of the machine I was taking the housing apart on the bottom to clean everything out when I discovered the discharge housing assembly was broken. I watched the video on your website and ordered the parts to replace it. It took me approx. 20 minutes to replace everything and the dishwasher seems to be working well again. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers
Deborah G Felton , DE August 11, 2014 Brokent discharge housing assembly on maytag dishwasher Watched the video step by step process and did it myself. The step by step youtube process was extremely easy to follow. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers
David E East Hartford , CT March 31, 2014 Appliance: Maytag Dishwasher MDB5130AWW Making a loud noise. Just took it apart. Found the broken part and replaced it. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Pliers, Screwdrivers
Terry R Ellicott City , MD December 17, 2021 Appliance: Maytag Dishwasher MDB7100AWW Loud rattling noise Took everything apart down to the discharge housing assembly but found nothing wrong. Unscrewed discharge housing and found rivet had come off of inner plate. Plate was resting on the impeller. Attempted to epoxy plate back on but didn't last through one cycle. Replaced housing assembly and impeller (not broken but just for good measure). O-ring for housing out of stock. Found similar one used for inline water filter at hardware store. O-ring not exact size but stretched it to fit. Worked fine. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Pliers, Socket Set
Robert M Port Vincent , LA January 05, 2021 Appliance: Maytag Dishwasher PDB1600AWT The shaft in the center of the discharge housing assembly sheared off and the lower cover was loose and making noise. I purchased a new discharge housing assembly housing from AppliancePartsPros.com. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers