Took out old timer, and upon inspection notice some electrical arcing( burned areas). I installed new timer and worked perfectly.
Problem was that it would fill up with water, but after it was filled the timer kept going but washer was not agitating. Only thing that worked was delicates wash.
Important Disconnect/ unplug power cord!
1. Remove knob, center cap pops off revealing a pin. Slide that off and the knob should come off.
2. Removing knob should reveal 2 socket screws remove thoses
3 remove 4 screws from the top of the washer and the whole top assembly should pop right up
4 remove white and black harness to the timer
5 install new timer, and follow steps 4 -1 to put everything back together.