Ricky H Cedarpark , TX August 19, 2023 Appliance: Samsung Dishwasher DW80M9550US/AA-00 Samsung Dishwasher Dw80m9550us/Aa-00: 7/e you may also hear a tapping noise during the wash cycle without any error code displayed. How to replace Dishwasher V-Timing Belt. Removed the waterwall assembly and replaced the belt. Released the 4 clips removed the gray cover at the bottom to expose two torque head screws. Remove the two screws and pull up on the back. Slide the red piece next to the door towards the door and pull up. The red piece nearest the door has to be disassembled push the two tabs and release. After you’ve disassembled the red piece nearest door, take the bottom red piece slide back over the peg nearest the door back into place. Now with the remaining pieces remove the old belt and replace the new belt. You will need a Phillips head screwdriver to remove two screws from the gray piece to separate the gray and white piece. And symbol of the way you disassembled the belt. Next line the back piece over the top of the motor and push down. Push the front red piece into the bottom red piece nearest the door so the tabs snapback in the place replace the two torque screws and snap the gray cover back over and place the waterwall assembly back into the clips securely at this point your repair should be complete. The repair should take someone between five and 10 minutes to complete it. Tools needed a bright, flashlight or lantern. A flat head screwdriver to help pry open the tabs a torque head screwdriver a Phillips head screwdriver. Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes