Tim M Grand Blanc , MI September 04, 2018 Belt broke on dishwasher Myself Read More... 4 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Screwdrivers
Brian K Ozark , MO August 04, 2019 Appliance: Model DS80J7550US/AA 02 Water wall belt broke Removed the Waterwall assembly. Disassembled it, installed the belt, reassembled the unit and installed it back in the washer. Fit perfect and washer running. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Ed S Statham , GA March 02, 2019 The belt broke on the waterwall of my Samsung dishwasher There were a couple of screws that needed to be loosen to remove the waterwall. Then the belt was easy to install. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Ricky H Cedarpark , TX August 19, 2023 Appliance: Samsung Dishwasher DW80M9550US/AA-00 7/e you may also hear a tapping noise during the wash cycle without any error code displayed Removed the waterwall assembly and replaced the belt. Released the 4 clips removed the gray cover at the bottom to expose two torque head screws. Remove the two screws and pull up on the back. Slide the red piece next to the door towards the door and pull up. The red piece nearest the door has to be disassembled push the two tabs and release. After you’ve disassembled the red piece nearest door, take the bottom red piece slide back over the peg nearest the door back into place. Now with the remaining pieces remove the old belt and replace the new belt. You will need a Phillips head screwdriver to remove two screws from the gray piece to separate the gray and white piece. And symbol of the way you disassembled the belt. Next line the back piece over the top of the motor and push down. Push the front red piece into the bottom red piece nearest the door so the tabs snapback in the place replace the two torque screws and snap the gray cover back over and place the waterwall assembly back into the clips securely at this point your repair should be complete. The repair should take someone between five and 10 minutes to complete it. Tools needed a bright, flashlight or lantern. A flat head screwdriver to help pry open the tabs a torque head screwdriver a Phillips head screwdriver. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Darty M Trion , GA March 14, 2021 Appliance: Samsung Dishwasher DW80J7550UG/AA The V belt timing belt was broken. I removed the part that contains the belt, which only required removing two screws. It was an easy repair but I did Google the repair and the video showed how to reassemble the unit step by step! Thanks to AppliancePartsPros.com.! Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers