Don D Lebanon , TN August 07, 2018 Appliance: Maytag Top Loading Washer HAV2557AWW Maytag Washer Hav2557aww: Out of balance on almost every load. How to replace Spring Kit (6 Springs). Replaced snubber, one foot and springs. I bought a package of 1 inch #10 by 24 thread screws but 3/4 inch would probably have worked for temporarily holding the spring around the snubber under the tub pulley. The snubber was not worn through, but there was a lot of plastic dust around the pulley. I think the main problem was weak springs. Taking them off was a lot easier than putting the new ones on, especially the two on the back of the washer due to working at arms length. Vise grip pliers is a must have for that reason. So far all is well and the washer works great. 11 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes