Pulled stove out from wall and unplugged for safety, removed back cover to check for any wire damage because the element blew out pretty bad but wiring was ok, removed wires from broil element at the back of the stove. Went to the front of the stove opened door and removed hangers and finally the element screws on broil element. I also unwired removed the bottom element to clean the inside of the oven with soap and water because the whole inside of the oven was cover in a light white coat of powder. While cleaning I found a 1 inch chunk of the broiler element lying in the bottom so I'm glad I made the extra effort to clean it. After cleaning, I replaced the bottom and top elements remounted the hangers for the broiler, went to the back and put the wires back on elements and replaced the stove back panel. Plugged it in and tested both elements worked fine.