Bernice L Lakehills , TX June 13, 2014 The bottom heating element in the oven had broken We unscrewed the plate holding the wires and connectors in place. (2 screws). Pulled the connected wires out an inch or two. Pulled the connectors off the wires on the broken element. Removed the element. attached the connectors to the wires on the new elements. Pushed the wires back into the back of oven (about an inch or two). Put the plate back in place and put the screws in. 75 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes