I ordered a broiler element, watched the video and replaced the element when it arrived. I turned off the electrical breaker to the stove/oven. I then removed the oven door from the hinges and removed the 1/4" square head screws that secured the element in place,( the video showed phillip head screws ), removed the element wires from the old element. Replaced the element wires to the new element and reattached the element to the oven with the hex head screws. I then put the oven door back on the hinges and I then turned on the electrical breaker for the stove/oven and turn the oven to broil. The element worked. I then turned off the oven and set the clock. This entire process took me approximately 20 minutes to complete.