Open the door and remove the three door cover retaining screws with a electric screw driver Phillips head next I poped the microwave door cover off with a large flat head screw driver taping it gently with a small hammer by the metal door hinges I then used my hands to pull the rest of the cover off. With the cover removed I removed the two handle retaining screws with a Philips head screwdriver located on the inside of the door cover and removed the handle. I then positioned the new handle in place and installed the 2 screws with a electric screwdriver pop the cover back on starting with the side closes to the hinges and reinstalled the three door cover retaining screws.