Whirlpool Microwave Handle

The Door Handle is an OEM replacement part for Whirlpool built-in microwaves. For black order 4393782.

Causes of failure include cracking or loosening of plastic mounting brackets over years of use. Handles also face heat exposure during each use cycle that can stress materials sooner.

Symptoms of a problematic handle are:

• Looseness preventing door latching
• Difficulty opening the microwave without two hands
• Discoloration, cracking or breakage at stress points

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some KitchenAid models.

The Microwave Door Handle (BLK) is an OEM part for Whirlpool microwaves. It provides a sturdy grip for opening and closing the microwave door. The handles measure approximately 10.45 inches long by 1 inch wide. This part has two mounting holes spaced 6.75 inches apart to fit existing screw holes on the microwave door.

Causes of a bad door handle can include general wear and tear from frequent use, accidental impact that leads to cracks or breaks, or exposure to high temperatures that may cause the material to degrade over time.

Symptoms of a bad door handle include:

• Difficulty opening or closing the microwave door
• A loose or wobbly handle
• Visible cracks or breaks in the handle
• The handle detaching from the door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

For white order 4393777.

This is the handle if the mounting holes are 6.75" The handle to use if the mounting holes are 8.5" is 8169738.

Color: Black

The Door Handle (BLK) is an OEM part for Whirlpool microwaves. This black handle provides a secure and comfortable grip for opening and closing the microwave door, ensuring easy access to the interior.  

Causes of a bad door handle can include regular wear and tear, physical damage from impacts, or exposure to high temperatures. 

Symptoms of a bad door handle include:

• The handle becoming loose or wobbly
• Visible cracks or breaks in the handle material
• Difficulty in gripping the handle securely
• The handle detaching from the microwave door

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Color: Black. For white order W10295692. For stainless order W10272107.

This genuine replacement door handle restores a secure grip and smooth operation to your appliance door. It replaces a worn, cracked, or broken handle so you can open and close the door safely and comfortably. What it does:

• Provides a sturdy handhold for opening and closing the appliance door
• Replaces cracked, loose, or broken handles that cause difficulty operating the door
• Restores proper alignment and fit where the original handle has worn or failed
• Helps reduce accidental slippage or dropping of the door during use

• One door handle

• Handle requires basic hand tools for removal and installation; refer to your model's service instructions
• Keep the appliance unplugged or power disconnected when working near electrical components
• Tighten mounting fasteners securely but avoid over-torquing to prevent cracking
• If the handle mounts to an inner door panel or trim, support the door edge to avoid damage during installation

A white replacement door handle that restores a usable grip and appearance to your appliance door. Ideal when the original handle is cracked, loose, or missing so the door can be opened and closed reliably. What it does:

• Provides a secure grip for opening and closing the appliance door.
• Replaces cracked, broken, loose or missing handles that make the door difficult to operate.
• Matches original mounting points for a direct-fit replacement.
• Restores the door's finished appearance and basic function.

• Disconnect power (and water, if applicable) before beginning any repair.
• Access the handle mounting screws by opening/removing the door panel per the OEM service instructions.
• Use basic hand tools and retain all original fasteners and trim for reassembly.

Color: Stainless. For black order W10246505. For white order W10295692.

This stainless-finish door handle restores a solid, comfortable grip for opening and closing the appliance door. Replace a cracked, loose, or worn handle to keep the door operating safely while maintaining a matching stainless appearance.

• Provides a secure handhold to open and close the door
• Restores safe, reliable access when the original handle is cracked, loose, or missing
• Matches stainless-finish appliances for a consistent look
• Common signs: wobbling handle, broken mounting points, difficulty opening the door

• Disconnect power before servicing; allow any hot surfaces to cool
• Access the handle mounting screws; on many models, the inner door panel or trim must be removed
• Transfer any end caps, spacers, or trim from the original handle if required
• Tighten screws evenly and verify alignment and proper door operation after installation

Genuine Whirlpool door handle that restores a secure grip and the appliance's original appearance, making it easier to open and close the door while replacing cracked, broken, or missing handles. What it does

• Provides a firm, ergonomic pull for opening and closing the appliance door.
• Replaces cracked, broken, loose, or missing handles that cause wobble or difficulty opening.
• Restores the door's original fit and appearance for a cleaner, finished look.
• Durable construction resists everyday wear and returns the intended function of the door.

• Safety first: disconnect power (and water supply for units with dispensers) before starting any repair.
• Remove old handle by loosening visible screws or releasing mounting clips; keep any original fasteners if they are reusable.
• Align handle mounting tabs or screw holes, then secure evenly—do not overtighten fasteners to avoid cracking the handle.

This replacement door handle restores a secure grip and makes opening the appliance door easier and safer. It's a direct-fit style designed to match the original part's shape and function for a clean, factory look. What it does:

• Provides a sturdy grip for opening and closing the appliance door
• Replaces cracked, loose, or broken handles that affect door use
• Helps restore proper alignment and ergonomics when the original handle is damaged
• Reduces the risk of sharp edges or failure from a compromised handle

• Disconnect power to the appliance before starting any repair
• Typical installation requires removing a few screws or clips; keep fasteners for reassembly
• Use hand tools only and avoid overtightening screws to prevent stress cracks

This replacement door handle restores a secure, comfortable grip for opening and closing your appliance door. Swap a cracked or loose handle to improve safety, function, and appearance. What it does:

• Provides the handhold needed to open and close the door safely
• Replaces cracked, broken, or wobbly handles
• Helps prevent further door damage from a loose or missing handle
• Common symptoms include a loose handle, broken posts, or difficulty opening the door due to handle failure

• Includes 1 door handle

• Disconnect power to the appliance before servicing; allow hot surfaces to cool
• Support the door and protect glass/finishes while working
• Use correct tools for the mounting screws; transfer any existing trim as needed
• Tighten hardware snugly without overtightening to avoid damage