Identifying the problem was easy, as my wife told me the oven was not heating up to the target temperature need.
I simply turned the oven on to maximum heat. When I noticed the bottom element not glowing red hot, as normal, I knew that was the culprit.
After waiting for the oven to cool down, I turned off the power to the oven. Then I removed the two #2 Phillips screws from the back of the element, holding it in place in the oven.
The element was able to slide out from the back of the oven a bit to expose the connections to the element itself. They are spade connectors. I used a pair of needle-nose pliers to wiggle on the spade connectors until they came off the element.
When the new element came in the mail a couple of days later, i reversed the process and voila! We now have a working oven again!
Thanks Appliance Parts Pros!
Steve.