Bill B Connellsville , PA March 09, 2016 The control panel had gone bad and the touch pad area had worn through it was not working Replaced the control panel. Removed the 11 torx screws from the inside front panel. Remove the panel disconnect the two electrical connections to completely remove the panel. Turned the power off to the dishwasher before starting. remove the 5 hex head screws holding the control panel to the front panel of the dishwasher. Opened the power box removed the wire strip to the control panel. Removed the control panel and reinstalled using the reverse procedure. Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes