The control panel assembly of my 5 year old dishwasher did not age well-- it became brittle and the indented grip finally broke out of it's plastic retainer clips. Disassembly was easy enough- removed star head screws (you'll need a Torx adapter for this) and removed the control panel assembly, disconnecting the ribbon cable from the gray electronics box and unscrewing and removing the latch assembly. These were left to hang and the control panel assembly came away easily enough. Make sure you save the grip recess part and screw-- not included with the control panel part. When the new control panel came in, I simply reversed the process, fitting the grip part, the latch assembly then the control box, connected the ribbon cable and screwed back in the completed assembly. Took about 15 minutes and was extremely easy.