John S Point Roberts , WA January 08, 2018 Appliance: General Electric Microwave PEM31DM3WW Ge Microwave Pem31dm3ww: Door wouldn't open. How to replace Body-Latch. The body latch is a replaceable plastic molding that hold 3 micro switches and a pivot post needed for the door opening mechanism. I suspect that post will often fail, as it did for me, by breaking off. The repair is straightforward: 1) Remove cover. You will need a security torx bit for a couple of the screws. 2) With a screwdriver push up the bottom door latch hook so that the door will open. 3) Take a picture of the body latch area so you don't get the wires mixed up. 4) Remove wires from micro switches. 5) Remove the 2 screws that hold the body latch. Remove body latch. 6) Swap micro switches and the plastic part that pivots on the post onto new body latch. 7) Install new body latch and reconnect wires. There is some movement possible around the screw holes so after tightening make sure the micro switches are engaged when the door is closed. 8) Test door closing/opening and proper functioning of the touch pad. 9 Reinstall cover. Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes