1) I tapped the pump with it in drain mode so it would pump the water out.
2) I unplugged the washer.
3) I removed the front cover.
4) I unbolted the old pump from the washer base.
5) I disconnected the power connection to the pump.
6) I disconnected the outlet hose.
7) I disconnected the inlet hose and removed the old pump.
8) I connected the inlet hose to the new pump.
9) I connected the outlet hose to the pump.
10) I bolted the pump to the base.
11) I connected the power plug to the pump.
12) I plugged in the washer.
13) I made sure it was all clear and tested the machine for a load.
14) I reinstalled the front cover.