Michael B Tucson , AZ July 28, 2018 Appliance: Samsung Microwave SMH9187B/XAA Samsung Microwave Smh9187b/Xaa: The dreaded SE code on the Samsung over the range microwave. How to replace Assy Control Panel;Smh91. I used the 'clean the contacts' trick a couple of times and that worked each time for a few months, but the most recent SE code message / failure could only be resolved for a few minutes so I replaced the Assembly Control. I hoped that was the problem and not the electronic mother board, and it worked!! My microwave is back in business. Before starting I took pictures of the old assembly to record the wire connectors and screw locations holding the mother board. The most difficult part of the fix was popping/easing out the aluminum tray off the plastic stops. I used a flat knife blade between the plastic housing and metal tray to move the plastic stops out far enough to free the tray. Reversing the process of putting the tray into the new Assembly Control plastic frame was easier. It just took some gentle pushing and prodding to lock the tray into the stops on new Assembly Control panel before screwing the electronic panel back down, reconnecting wire harnesses, and hooking the panel back on the microwave. Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes