EASY PEASEY!!! My dryer is quite old and does not have a 'peep hole' to look though. It does have an access panel but I couldn't seem to open it. After determining that my issue was one of 3 parts (fuse, coils, igniter) I opted to order all 3. First I replaced the fuse because that was the easiest one (remove the back of the dryer). Tested dryer but still not hot. Then, based on what was described in the video, I was able to figure out how to get that front access panel open (putty knife in the right place; took some doing). It turned out that my dryer was even easier to fix than in the video because my coils were right there in the front behind that panel! I did not have to remove the drum to get to them (needed a very short screw driver and managed with a rachet). I changed the coils and decided to plug in the dryer and see if the flame would ignite (then I would know I did not need to install a new igniter). Moment of truth... IT WORKED!!! THANK YOU! I am so proud of myself. My 30 year old dryer lives on!