Do-It-Yourself Story

1) Open Door 2) Remove Filters to expose sump (area filled with water) 3) Remove water from sump with sponge 4) Close Door 5) Remove kickplate screws, and kickplate comes free (2 Phillips Heads) 6) Open Door 7) Remove front portion of door by removing Torx Screws (Not all though, the ones at the top hold the control panel on) 8) Disconnect plug from pump 9) Twist pump to unlock 10)Remove pump by pulling it out 11) Clean water that has spilled out up 12) Push new pump into place and turn to lock it in 13) Reconnect plug to pump 14) Put Door front back on 15) Replace kickplate 16) Have a cold drink!