Do-It-Yourself Story

Unplugged the icemaker from the wall then plugged it back in and the power came on, went to run diagnostic and it went dead again. This happened several times, once it actually ran a cycle and started making ice, but later went dead again. I couldn't use diagnostics since it was dead, I decided to check all the pumps so I took everything out, while I was disassembling I noticed that the middle wire on the sensor plug was blue with corrosion and was loose. I stripped the wire, crammed it back into the plug and the icemaker ran fine. I then ordered a new sensor and installed it- still good after a week!!