Ordered new element from AppliancePartsPros.com. Part arrived well packaged and the new element was identical to the old one. Opened power panel breaker for range. Pulled range out of space for easier access to do job. Removed top of range by removing front control panel (6 screws) after disconnecting 3 wire plugs and then supported the control panel on the oven door handle. Next I removed the glass smooth top by removing (6 screws). Inverted the smooth top to allow removal of the old element. The element was secured by 2 screws and associated wire bracket were secured by an additional two screws. After disconnecting 3 wire connectors and associated screws for element and wire brackets the old element was removed. I reversed the process for installing the new element taking care not to damage any portion of the new element. I recommend that care be taken when handling the new element as the coils are very delicate in appearance and there are other control parts attached to the element that could be damaged if not handled carefully. After replacement of the element it is a simple matter of reversing the initial process of turning the smooth top upright being careful not to damage any of the four elements and then reinstalling the screws. I recommend at this point to plug the front control panel plugs back in and testing the new element. You will need to close breaker for range providing you did open it. Be careful as there is the possibility of getting shocked on exposed electrical connections on the back of the control panel. Most of the connections on my range did not present a problem for electrical shock due to their design but other models may be different. After testing the new element I reinstalled the front control panel and pushed range back into place. Overall, if you have a moderate understanding of electrical circuits and are mechanically inclined this element replacement is very easy. The total time to do this I marked as 30 - 60 minutes but I took my time to make sure I didn't damage the new element. I cannot emphasize enough the importance of handling the new element carefully.