Do-It-Yourself Story

This is the SECOND time I have replaced this part. The first time was due to the plastic draw rails cracking and the draws would not go in and out correctly. This time (the second time) the frame actually cracked in the left rear corner. This is not a real simple part to replace, as getting the 'old' parts out can be tricky. Just let the old frame warm up to room temp before you begin. Have some nice flat blade screwdrivers and rigid putty knives - as you will need these. Getting the center draw guide out is the most tricky. Do the back first, using a flat rigid putty knife to carefully lift the tabs that hold that part in on BOTH top and bottom. You will find having an extra set of hands will help.