Do-It-Yourself Story

Rivet on right hinge assembly was broken. Replaced the hinge. Took a hour. Mostly because the drawer on the bottom would not come out. Tipped the unit on its side and opened the drawer to the max. Took off the Oven door by lifting it up while partially open. took out the two screws holding in the hinge assembly. The assembly was missing screws so I tried to use the old screws. I should have pre assembled them to make sure the that the screws would thread properly. Had to remove the assembly and thread the screws, I got some self tapping screws to start the thread, then I used the original screws. Make sure you put the shortest one on the bottom, else the door will not complete close (don't ask how I know). It would have been very nice if the assembly included self tapping screws.