Timothy K Papillion , NE August 27, 2017 Appliance: Samsung Microwave SMH9187W/XAA Samsung Microwave Smh9187w/Xaa: Samsung se error code model smh9187w. How to replace Control Panel Assembly. Note, this is the touchpad and casing, not the control board. The touchpad assmby includes the ribbon cable. I got the Samsung Control Panel Assembly from AppliancePartsPros.com (AP5325311). It took less than 5 minutes to swap it out. You need to swap the control board to the new assembly so there's actually only one wire to remove - the ribbon cable that is attached to the touchpad. Removed the grill (with the door open on this one, 2 screws at the top and the grill slides left 1/2 inch and gently pop it off). Remove the screw holding the top of touchpad and swing it out. Remove the 4 screws holding the control board to the panel. Replace the touchpad and connect the board. Connect the from the touchpad ribbon cable to the control board Put the screws back in. It's been just a few days but it's working great so far. I had tried cleaning the ribbon cable a few times in the past which always worked temporarily. I'm hoping the problem really is the touchpad itself and this replacement fixed it. I bought this microwave for about $400 5 or 6 years ago and a $50 part seemed like a reasonable investment. The part arrived within a week with regular shipping. It's brand new and well packed. I'm hoping to get a few more years from this oven. Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes