I looked up the part for my stove and ordered the part. It took a few days to receive the switch.
There were no instructions with the part, but it appeared to be pretty simple. I shut off the power to the stove, and pulled the stove away from the wall. I removed the screws holding the cover panel from the back of the stove. I removed the knob from the burner control on the front and removed the screws holding the switch. I pulled the wiring harness off the old switch with a screw driver. I then put the wiring harness on the new switch and put the screws back on the switch from the front,put the knob on the switch and tested the switch for functionality. It worked, so I shut the power off, put the cover panel back on the stove, pushed it back into place and turned the power on. I had to shorten the switch to match the others with a pair of pliers.