First, have someone available to help hold the control panel once it's been removed so you can work on it with two hands. 1.) Shut off breaker to stove. 2.) I had to pull the stove out approx. 2" so I could access screws on the sides of the control panel. 3.) Removed 2 - phillips head screws on sides and 4 - 1/4" nut head screws on the bottom of the front control panel. 4.) Pulled knob off the front of switch. 5.) Unplugged the two wire plugs that were attached to the back of the switch. 6.) Remove two screws on the front of the panel that hold the switch in place. 7.) Insert new switch and attach with two screws. 8.) Plug in two wires. 9.) Re-attach control panel to the front of the stove with screws. 10) Put knob back on switch. 11.) Turn power back on and test.