After searching out the reason for the code I ordered the thermistor. It arrived quickly and installed easily. After putting the washer back together and plugging it in it was still throwing the te error code. After taking a short break to cuss up a storm I looked up the issue on the internet. After reading about issues with the wiring on this model I decided to chase down all the wires to look for problems. I started at the bottom in the rear of the machine. I removed a small amount of padding from the wires behind the drum coming off the thermistor lead and found the white wire cut clean. I spliced the white wire back together and also did the orange wire because to looked to have a weak spot. I reassembled the washer and plugged it in and no more code! Working fine now.