Giovanni R Bronx , NY May 17, 2015 Appliance: Frigidaire Frg(V2) / Gas Cooktop FGC3X4XADC Frigidaire Cooktop Fgc3x4xadc: 1 top burner wouldn't lite. How to replace Cooktop Igniter Electrode. Since all the other igniters were operating properly I just had to change out the 1 bad igniter. Like everyone else, The burner retaining screw broke right away. I decided to change it from underneath. Removed the 4 screws holding the cooking surface to the chasis. There are 8 screws in pairs, 1 upper and 1 lower. You just need to remove the upper 4. Prop up the cooking surface. Remove the wire and then the 1 screw holding the igniter in the burner. Igniter should slide right out. Place the new igniter in place carefully to not damage the ceramic tip. Replace wire. Done. 4 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes