Removed microwave from wall:
- remove surround bracket with 4 screws and then microwave just lifts out
Loosened bottom of Microwave, pried open and replaced motor:
- removed 10 Phillips screws holding bottom of microwave
-Removed 2 Phillips screws on each side of microwave holding cover
-Needed to remove 2 locked torx screws on back that hold cover, but did not have tool.
-Since cover would not come off (did not have tool), I pried the bottom open from the front edge of the microwave and had reasonably easy access to the one screw holding the motor
-Replaced motor and re-assembled.
Worked great, though the side cover is slightly bent due to my inability to remove the locked torx screws. It is in the wall, so nobody will every know.