David S Saugatuck , MI May 31, 2019 Washer was leaking from the tub when on still cycle Replaced the seal and the washer would not spin on spin cycle. The top cover was pushed to far down and was making contacts with the inner tub, not allowing it to spin. Move the top cover up about 3/8 of an inch and spun inner tub by hand to make sure it was not rubbing. Ran a load and saw that it was leaking. Found the clamp was not placed correctly on the seal. Placed clamp correctly and still had a leak. Put a bead of silicon on the seal and installed, let it sit for 24 hrs and then tried again. No more leaks. 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours