Jesse P Layton , UT October 04, 2015 Appliance: Samsung Washer WA422PRHDWR/AA-0000 Samsung Washer Wa422prhdwr/Aa-0000: Washer pump rattled off of the drum spilling all water inside all over my house huge mess!. How to replace Washer Drain Hose. After some research I discovered the design change Samsung did 3 months after my model was manufactured. Instead of spending $110 on the "redesigned" part I took a good look at it and determined I could disregard the current mounting bracket and order 3 parts to make the conversion with my existing pump, which is working just fine. I did this for about $30 and that includes shipping. Saved $80!!! You'll order the new floor bracket, a hose that has a 90 on it to connect to the drum and another short hose that connects the pump to the exit hose out of the washer. NOTE: don't use the hose rings that are on there. Use actual hose clamps that you can since down tightly witha nut driver. The 3 parts #s you'll need: 1) DC67-00601A (drain hose) 2) DC61-03550A (Pump bracket to mount to floor) 3) DC97-17417A (washer tub drain hose) 15 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes