Parts for Bosch B22CS50SNB/03: Door 1 Parts

The Active Carbon Filter is an OEM part for Bosch refrigerators. This filter helps reduce odor-causing substances inside the refrigerator for fresher preserved food. It traps molecular impurities through an advanced filtration process.

Causes of a filter requiring replacement include normal lifespan expiration as indicated on the packaging. For optimal results, these filters should be replaced according to manufacturer guidelines.

Symptoms of a spent filter include:

• Return of odors to the refrigerator interior
• Potential taste transfers between strong smelling foods
• Reduced effectiveness of the odor reduction system

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Water Filter is an OEM part for Bosch refrigerators. This part removes impurities and contaminants from the water supply to your appliance. This part ensures that the water and ice dispensed by your refrigerator are clean, taste fresh, and are free of common waterborne particles and substances. 

Over time, the water filter can become clogged with sediments and contaminants, reducing its effectiveness and potentially affecting the taste and quality of the water and ice. Regular replacement is essential for maintaining optimal performance.

Symptoms of a bad Water Filter include:

• Unpleasant taste or odor in the water or ice
• Decreased water flow to the dispenser or ice maker
• Visible particulate matter in the water or ice cubes

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This is a replacement interior tray that restores a flat, stable surface inside the appliance for holding items and directing water or debris. Replacing a damaged tray helps keep loads supported and the interior tidy. What it does:

• Provides a stable platform for items inside the appliance
• Helps channel water and debris to appropriate drain areas
• Prevents items from shifting or contacting moving parts
• Restores proper spacing and support if original tray is cracked, warped, or broken

• One replacement tray

• Disconnect power and water before servicing
• Remove any racks or components that block access to the tray
• Handle the tray carefully to avoid damage to seals or nearby components
• If any clips or fasteners are damaged, replace them before reassembly

This replacement door seal fits into the groove around the dishwasher opening. It compresses against the door to create a watertight barrier, helping stop front leaks and restore a proper, snug close. What it does:

• Forms a continuous seal to keep wash water inside during all cycles
• Helps the door latch compress correctly for a tight, secure close
• Replaces cracked, flattened, or torn gasket that can drip at corners or along the bottom
• Helps resolve: water on the floor at the front, moisture or steam escaping, door harder to close

• Includes 1 door seal

• Disconnect power and shut off the water supply before servicing
• Pull the old seal straight out of the channel; clean the groove of debris and residue
• Start at the top center; press the new seal evenly into the channel without stretching, ensuring corners are fully seated
• Close and reopen the door to seat the seal; run a short cycle and check for leaks

This cover is a replacement access panel that protects internal components and helps keep wiring and mechanisms secure. It restores a finished appearance and shields parts from moisture and debris. What it does:

• Covers and protects internal components behind the appliance control or service area
• Helps prevent accidental contact with wiring and moving parts
• Keeps dust, lint, and moisture away from sensitive components
• Restores the original fit-and-finish of the appliance exterior

• Disconnect power before attempting any repair to avoid electric shock.
• Remove only the fasteners specified by the manufacturer and keep track of hardware.
• Replace any damaged clips or screws.

This support mounting bracket reinforces and secures appliance components to reduce movement and maintain proper alignment during use. It restores stable mounting for parts that have loosened, shifted, or rattled. What it does:

• Provides a stable mounting point to hold panels, assemblies, or housings in place
• Prevents vibration and noise caused by loose or sagging components
• Keeps moving parts aligned to help ensure smooth operation
• Replaces worn, cracked, or broken supports that allow parts to shift

• Intended for users comfortable disassembling appliance panels; disconnect power and water before starting
• Verify orientation and fastener locations match your appliance before tightening
• Use existing screws or fasteners unless replacement fasteners are specified by the manufacturer

A replacement hinge pivot bearing that supports the dishwasher door for smoother, quieter opening and proper alignment. Fits into the door hinge assembly to reduce binding and wear for reliable door operation. What it does

• Supports the door hinge pivot so the door opens and closes smoothly.
• Reduces friction and wear on the hinge, helping prevent sagging or misalignment.
• Stops squeaks, sticking, or rough movement caused by a worn bearing.
• Works as a direct replacement for the corresponding hinge bearing in the door assembly.

• Disconnect power to the appliance and shut off water before starting any repair.
• Support the door while removing hinge fasteners to prevent the door from dropping.
• Access typically requires removing the lower toe panel or inner door trim—use basic hand tools.
• Inspect hinge components and nearby parts for wear; replace any damaged hardware and test door alignment after installation.

The Motor is an OEM part for Bosch refrigerators. This motor is specifically designed to power the ice dispenser mechanism, allowing for the convenient dispensing of ice cubes or crushed ice. It delivers the necessary power to rotate the dispenser auger, providing you with a steady supply of ice whenever you need it.

A bad motor can occur due to wear and tear, electrical malfunctions, or motor failure. Signs of a faulty motor include the ice dispenser not working, the auger not rotating, or unusual grinding or buzzing noises during ice dispensing.

Symptoms of a bad motor include:

• Inability to dispense ice  
• Noisy or erratic operation 

Replace your malfunctioning or worn-out ice dispenser motor with this genuine OEM Bosch part to restore your refrigerator's ice dispenser. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This replacement lid restores the appliance's finished top cover, protecting internal components and helping the door/hatch close properly. Use when the original lid is cracked, warped, or missing to keep the unit looking and operating as intended. What it does:

• Covers and protects the appliance's top/opening area from debris and damage.
• Secures to existing hinge or mounting points to ensure proper closure.
• Replace if you see visible cracks, chips, warping, or if the lid no longer latches or aligns.
• Helps prevent rattling or rubbing caused by a damaged or loose lid.

• Disconnect power (and water, if applicable) before starting any repair.
• Handle edges carefully; some lids include glass or thin sheet material that can chip.
• Basic hand tools (screwdriver/torx) may be required; keep mounting hardware if reusing.

This replacement tube routes fluids between internal components to restore normal flow and prevent leaks. It fits specific Bosch appliances and replaces a worn, cracked, or damaged original tube. What it does:

• Channels water or drain flow between appliance components to maintain proper operation
• Stops leaks caused by cracked, split, or hardened tubing
• Helps restore normal water flow that can cause poor washing or filling performance
• Prevents intermittent operation caused by restricted or collapsed tubing

• Disconnect power and shut off the water supply before starting any repair
• Inspect and replace any damaged clamps, grommets, or seals when installing the tube
• Ensure the tube is routed without kinks and secured with the correct clips or clamps
• Test the appliance for leaks and proper operation after installation