Parts for Bosch HMV3051U/01: Door Assembly Parts

The Door is an OEM component specifically designed for Bosch microwaves. It provides structure and encloses the microwave cavity. 

The door is responsible for safety and proper functioning. Its viewing window allows monitoring of food cooking without opening. Interior and exterior door handles facilitate convenient, one-handed operation. 

Symptoms of a bad door include:

• Loose or improper fit that allows microwaves to leak 
• Cracks or breaks in the window allowing exterior contact
• Difficulty latching or remaining closed securely
• Warping or misalignment preventing a flush seal

Causes can be accidental damage, such as dents or impact cracks, or loosening of mounting hardware over time. 

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore microwaves.
 

This glass front panel replaces a cracked or scratched control/display surface to restore the appliance's appearance and allow normal access to controls. Tempered exterior glass designed to fit the original door assembly. What it does:

• Protects the control area from moisture, dirt, and daily wear
• Restores a smooth, intact surface when the front glass is cracked, chipped, or scratched
• Keeps touch and button interfaces accessible and visible
• Helps prevent moisture intrusion that can affect underlying electronics

• Handle carefully; tempered glass can break if dropped or struck
• May require partial door disassembly to remove the old panel and secure the replacement
• Use proper fasteners and avoid over-tightening to prevent cracking

This frame is a replacement mounting support that secures and aligns the appliance panel and related components for stable operation and a proper fit. Restores correct panel positioning and reduces rattles or gaps. What it does:

• Provides structural support for the appliance panel or door to maintain proper alignment
• Secures attached components and helps prevent movement or vibration during operation
• Helps restore a tight fit and consistent gaps between the panel and cabinet
• Common symptoms: loose or misaligned panel, visible gaps, rattling or vibration during use

• Disconnect power before beginning any disassembly or service
• Follow the OEM service manual or diagram for step-by-step removal and reinstallation
• Handle surrounding trim and finish panels carefully to avoid scratches or damage
• Retain and reuse any original clips or fasteners unless replacement is specified

The Hook is an OEM part for Bosch microwave doors. Manufactured from heat resistant composite materials, it firmly holds the door closed during cooking cycles.  

Causes of a faulty latch/hook include failures of being worn down from repetitive opening/closing motions over time. Exposure to high heat or abrasive cleaners also leads to decreased functionality.

Symptoms of a damaged latch/hook involve:

• Doors not sealing fully or locking properly
• Failure to open after cooking
• Degrading latch fittings allowing moisture or debris entry

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This replacement spring restores the proper tension and return action for the mechanism it serves in your appliance. It helps moving parts operate smoothly and reset reliably so doors, levers, or linkages stay aligned and feel correct. What it does:

• Provides controlled tension so doors, flaps, levers, or linkages move and return to position correctly
• Helps maintain alignment and consistent feel of the mechanism
• Typical failure signs: weak or broken return, sticking/sluggish movement, parts that won't stay in position, or unusual popping noises
• Visible distortion, rust, or a missing spring indicates replacement is needed

• Includes 1 spring

• Disconnect power (and water, if applicable) before servicing; wear gloves and eye protection
• Springs store energy—release and install with care, keeping fingers clear
• Note original routing/orientation; take photos to match placement during reassembly
• Use needle-nose pliers or a hook tool for control; replace paired springs together if your model uses two

The Microwave Door is an OEM component specifically designed for Bosch microwaves. It provides a barrier that safely contains microwave energy within the cooking cavity. 

Causes of a bad microwave door can include wear and tear over time, exposure to continuous heat and steam from cooking, as well as accidental impacts that damage the sealing surfaces.

Symptoms of a bad microwave door include:

• Failure to securely latch or lock in place  
• Warping or cracks in the glass window inhibit visibility
• Loose door mounting prevents proper sealing
• Microwave energy leaks when the door is closed  

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This replacement frame is a structural support piece used to hold and align its associated assembly within the appliance. Replacing a damaged or warped frame restores proper fitment and helps prevent looseness, rattling, or misalignment.

• Provides mounting and structural support for the related assembly
• Keeps panels, covers, or hardware properly positioned
• Helps reduce vibration, rubbing, and premature wear
• Common clues it's needed: cracked/missing tabs, distortion, loose fit, difficulty opening/closing the related component

• Disconnect power (and water or gas, if applicable) before servicing
• Note orientation and hardware locations; take photos for reference
• Transfer any clips, screws, seals, or brackets from the original part if required
• Do not overtighten fasteners; confirm smooth fit and test operation before reassembly

The Door Handle is an OEM part for Bosch microwaves. It serves as the primary mechanism for opening and closing the microwave door, allowing convenient access to the interior cavity.

Causes of a bad Door Handle can range from physical damage due to impact or excessive force, to general wear and tear over time, or internal mechanisms failing to function properly.

Symptoms of a bad Door Handle include:

• Difficulty opening or closing the microwave door
• The handle feeling loose, wobbly, or detached
• Internal components of the handle mechanism breaking or jamming
• Improper sealing of the door, which can lead to microwave leakage

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This Door Handle Support is an OEM replacement part for Bosch microwaves. This Door Handle Support ensures a perfect fit and reliable performance, making it an important component for your Bosch microwave.

A bad Door Handle Support can occur due to various reasons, such as regular usage or accidental damage. When the Door Handle Support is compromised, you may encounter issues with the microwave's door handle. It can become loose, making it difficult to open or close the microwave door smoothly. 

Some common symptoms indicating a faulty Door Handle Support:

• Loose or wobbly handle
• Difficulty in opening or closing the microwave door
• Handle detachment or instability

This genuine Bosch OEM part is also compatible with Thermador, Gaggenau, and some Kenmore models.