Parts for Bosch B11CB50SSS/08: Door & Drawer Asy Parts

This replacement door seal is the flexible gasket that creates an airtight closure between the refrigerator door and cabinet to help maintain proper temperature and reduce energy loss. Designed to restore a full door seal for reliable cooling. What it does:

• Seals the door edge to prevent warm air ingress and cold air escape
• Helps reduce frost buildup and keeps internal temperatures consistent
• Can improve cooling performance and lower energy use when the original seal is worn
• Common symptom: visible gaps, torn or flattened gasket, condensation or frost around door

• Disconnect power to the appliance before starting any repair
• Clean the door frame and gasket channel; remove old adhesive or debris for a proper fit
• Press the gasket evenly into the channel around the door, starting at one corner and working around to avoid wrinkles
• If adhesive or fasteners are present, use manufacturer-recommended adhesive/fasteners and allow adhesive to set before closing the door

This replacement freezer door compartment provides a secure shelf inside the freezer door to hold frozen foods and small containers, restoring lost storage and organization in compatible refrigerators. Durable molded plastic matches original fit and function. What it does

• Replaces a cracked, broken or missing freezer door shelf to restore door storage capacity
• Holds lightweight frozen items and helps keep contents organized and accessible
• Secures to the freezer door to prevent items from falling during normal use
• Matches the original shape and mounting points for a proper fit in compatible models

• One freezer door compartment (door shelf) as shown

• High-level replacement: typically snaps or screws into existing door mounting points
• Remove food and empty door before removing the damaged compartment
• Use gentle pressure to avoid damaging door trim or mounts; retain hardware if present

This door seal is a replacement inner door gasket that helps maintain a watertight seal on the appliance door to prevent leaks and ensure proper operation. It restores a snug fit where the door meets the cabinet. What it does:

• Replaces a worn, torn, or deformed inner door gasket to stop water or air leaks.
• Helps restore proper door closure and consistent cycle performance.
• Reduces moisture buildup and prevents drips or puddles under the appliance.
• Commonly used when you see water on the floor, a loose-feeling door edge, or visible gasket damage.

• One inner door seal.

• Inspect the door frame and retainer for damage or debris before installing the new seal.
• Clean mating surfaces and press the seal evenly into the retainer to ensure a continuous, gap-free fit.
• Disconnect power and shut off water before starting work to avoid injury or electrical hazard.

This door handle replaces a worn or broken dishwasher access handle to restore a secure grip and clean appearance. It provides the primary grip point for opening and closing the appliance door. What it does:

• Replaces a cracked, loose, or cosmetically damaged door handle
• Restores a solid, comfortable grip for opening and closing the door
• Helps prevent further damage to the door trim and latch area from improper use
• Matches the original fit and mounting locations when the correct part is used

• Disconnect power and turn off water supply before servicing.
• Some models require removal of the inner door panel to access handle mounting screws; save all fasteners.
• Use appropriate hand tools and avoid overtightening screws to prevent damage.

This replacement glass panel restores a cracked, chipped, or broken appliance door so the unit looks and functions like new while protecting internal components. It fits the original mounting points for a direct swap. What it does:

• Replaces damaged or shattered door/control glass to restore appearance and safety
• Provides a clear, durable surface for viewing and protecting internal components
• Stops drafts, moisture intrusion, and debris from entering the appliance cavity when the door is closed
• Helps prevent further damage to underlying trim, controls, or insulation

• Disconnect power and, if applicable, water before starting work
• Handle glass carefully and wear cut-resistant gloves and eye protection
• Installation may require removing door trim or bezels; keep fasteners organized

A clear frozen-food container that replaces a cracked or missing freezer drawer bin to keep frozen items organized and contained. Durable molded plastic restores storage capacity and helps prevent spills and frost buildup inside the freezer compartment. What it does

• Replaces a damaged or missing frozen-food drawer/bin so items stay organized and contained.
• Provides a rigid shelf/bin surface for stacking and accessing frozen goods.
• Helps reduce loose food contact with interior walls to limit frost and mess.
• Visible clear plastic lets you quickly identify contents without opening multiple compartments.

• One frozen-food container/bin

• Inspect the drawer tracks and slides for damage before installing the replacement.
• Slide the container into the existing guides until it seats; remove gently by reversing the motion.
• Handle the plastic carefully to avoid cracks; do not force onto bent or obstructed rails.

This frozen food container is a replacement freezer drawer that stores and organizes frozen items while keeping them accessible. It restores proper storage capacity and smooth drawer operation in compatible refrigerators. What it does:

• Holds and organizes frozen foods so items stay contained and easy to access
• Replaces cracked, broken, or missing freezer drawers that prevent proper storage
• Slides into existing freezer rails to restore normal drawer movement
• Helps maintain airflow and consistent storage when installed correctly

• One frozen food container (freezer drawer)

• Slide the drawer into the freezer compartment rails until it seats; no tools typically required
• Remove food and frost build-up before installation for safe, smooth fitting
• Clean with mild soap and water; avoid abrasive cleaners and sharp objects that can damage the plastic
• Handle by the edges to prevent cracking; if rails or supports are damaged, replace those parts first

This replacement frozen food container is a clear plastic drawer that restores storage and organization in the freezer compartment. It gives a proper place to keep frozen items accessible and helps maintain neat stacking and separation. What it does:

• Replaces a cracked, broken or missing freezer drawer so items stay contained and supported
• Restores proper sliding/storage function on freezer rails for easy access
• Keeps frozen items organized and separated to reduce spills and disarray
• Makes it easier to remove and carry groups of frozen items for loading or cleaning

• Remove all contents from the freezer area before replacing the drawer
• Slide the new container into the existing freezer tracks until it seats; check for smooth operation
• Hand wash with mild detergent and warm water; avoid abrasive cleaners or scouring pads
• Handle carefully to avoid cracking during installation; do not force if it does not align

This ice container stores and dispenses ice made by the freezer's ice maker so you have easy access to ice without handling the tray. It keeps ice organized and contained inside the freezer bin area. What it does

• Collects and holds ice produced by the refrigerator's ice maker so cubes are ready to use
• Guides ice toward the dispenser or bin opening for easier removal
• Prevents loose ice from scattering inside the freezer compartment
• Helps separate ice from other frozen items to reduce clumping

• Always unplug the appliance or shut off power at the breaker before installing parts.
• Remove any ice from the old container and clean the compartment before fitting the new bin.
• Slide the container into place until it seats securely; avoid forcing or bending mounting tabs.
• Dispose of the old bin according to local recycling guidelines if damaged.

This tray is an interior replacement part that provides a stable surface for holding items and collecting light runoff inside the dishwasher. It restores proper support and containment to the tub area for reliable cleaning results. What it does:

• Replaces a cracked, warped, or damaged interior tray that can interfere with loading or water flow
• Helps contain small drips and prevents items from resting directly on the tub floor
• Restores a level surface for racks or smaller dishwasher accessories
• Addresses symptoms like items shifting during cycles or visible tray damage

• Remove power to the appliance before inspecting or replacing parts
• Access the tray through the tub interior; some models may require loosening racks for clearance
• Handle edges carefully to avoid damage to surrounding trim or seals

This interior tray replaces a damaged or missing dishwasher tray to securely hold small items and restore proper organization inside the tub. It helps prevent small pieces from shifting during wash cycles for more reliable cleaning. What it does:

• Provides a stable surface to hold small dishes, lids or accessories so they don't move around during a cycle
• Helps maintain proper water flow and drainage by keeping items elevated
• Replaces cracked, warped or broken trays that can cause items to tip or block spray
• Fits into the designated rack area and snaps or slides into place for secure positioning

• One tray (part number 00702549)

• Disconnect power to the appliance before performing any service
• Remove the appropriate rack to access the tray mounting area
• Align the tray with the rack guides and press until it snaps or slides into the factory position
• If clips or fasteners appear damaged, replace them to ensure a secure fit

A replacement bottle shelf designed to fit in the refrigerator door and keep bottles and tall containers organized and secure. Restores usable storage space and helps prevent items from falling when the door is opened. What it does:

• Provides a sturdy shelf on the inside of the refrigerator door for bottles and tall items
• Replaces cracked, warped, or missing door bin shelving that causes items to tip or fall
• Restores proper spacing and organization for door storage
• Matches OEM fit and mounting points for straightforward replacement

• Installation typically requires removing door items and snapping the shelf into the existing door mounts; handle gently to avoid breakage
• Wear gloves to protect hands from sharp edges on damaged parts and to improve grip on plastic components

This firm plate is a small metal mounting plate designed to secure internal components and keep parts aligned for reliable operation. It restores correct positioning and helps prevent movement or vibration-related issues. What it does:

• Provides a stable mounting surface for adjacent parts to maintain alignment
• Reduces vibration and movement that can cause noise or loose connections
• Helps ensure consistent mechanical contact where precise positioning is required
• Stops intermittent faults caused by shifted or unsecured components

• Install only on the locations specified by the appliance manufacturer; confirm orientation before tightening fasteners
• Use appropriate hand tools and replacement hardware; do not overtighten to avoid distortion
• Disconnect power and follow all safety procedures before accessing internal parts