Parts for Bosch HBLP451RUC/01: Door Parts

This glass panel replaces a damaged inner oven door glass, restoring visibility and proper heat containment. A clear, intact pane helps the oven heat efficiently and keeps the door insulated and safe to use.

• Forms the inner viewing surface of the oven door
• Helps retain heat and maintain proper oven temperatures
• Restores clear visibility into the oven cavity
• Common failure signs: cracked or shattered glass, heat loss, door too hot to touch on exterior, visible gaps or rattling

• Disconnect power and allow the oven to cool completely before service
• Support the door and remove it for safe access
• Handle glass with cut-resistant gloves; avoid overtightening fasteners
• Clean and reuse existing gaskets/insulation if in good condition; replace if damaged

This is a replacement mounting screw used to secure appliance components so panels and assemblies stay firmly in place during normal use. It restores proper fastening and helps eliminate loose parts or vibration-related noise. What it does

• Fastens panels, brackets, or small assemblies to the appliance frame
• Restores secure mounting when original screws are missing, stripped, or damaged
• Helps reduce rattling, vibration noise, and misaligned panels
• Small hardware solution for cosmetic and functional attachment points

• Use the correct screwdriver or driver bit to avoid stripping the head
• Do not overtighten; stop when snug to prevent thread or part damage
• Disconnect power and/or water and follow appliance safety steps before accessing internal parts
• Keep removed hardware organized so replacement goes to the correct location

This door hinge secures and guides a refrigerator door so it opens and closes smoothly. Replaces a worn or damaged hinge to restore proper door alignment and sealing. What it does:

• Supports the weight of the refrigerator door and keeps it aligned on the cabinet.
• Enables smooth opening and closing without binding or catching.
• Common fix for a door that sags, rubs, or doesn't seal fully.
• Helps stop noise or grinding coming from a damaged hinge.

• Disconnect power and remove food from door shelves before starting work.
• Support the door or have a second person hold it while you remove and install the hinge.
• Use appropriate hand tools; avoid forcing hardware to prevent damage.

The Insert is an OEM part for Bosch ovens. It secures and stabilizes the oven door handle, ensuring proper alignment and smooth operation.

This insert is engineered to withstand the rigors of regular use, providing a stable and reliable connection between the oven door and the handle.  

Causes of a bad mounting insert can include excessive wear and tear, exposure to high temperatures or moisture, or physical impact that may cause deformation or cracking.

Symptoms of a bad insert include:

• Loose or wobbly door handle
• Difficulty in opening or closing the oven door smoothly
• Misalignment of the handle with the door
• Potential damage to the handle or door due to improper support

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Handle End Cap is an OEM part for Bosch ovens. This end cap sits at either end of the range handle and helps complete the handle assembly. It provides an ergonomic gripping surface for easy lifting and lowering of the range door.

Causes of a bad handle end cap can include wear and tear or damage from excessive opening and closing of the range door over time. The end caps take the brunt of this activity and can crack, split or break off.

Symptoms of a bad handle end cap include:

• Exposed or sharp metal edges on the handle where the end cap is missing
• Difficulty opening or closing the range door smoothly due to an imbalanced handle
• Loose or insecure end cap that could potentially detach during use

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This is a replacement glass panel for the dishwasher control/display area that restores a clean, functional front surface and protects the underlying controls. Replaces cracked, scratched, or badly worn glass to improve appearance and usability. What it does:

• Covers and protects the control buttons and display from moisture, grease and debris.
• Keeps the control area looking clean and finished after damage to the original glass.
• Helps prevent direct contact with underlying electronic components.
• Restores a smooth surface when the original glass is chipped, cracked, or scratched.

• Disconnect power to the appliance before attempting replacement to avoid shock.
• Handle the glass carefully; wear cut-resistant gloves and safety glasses.
• Removal/installation may require removing door trim or bezels and careful alignment; keep all fasteners.
• If adhesive or clips secure the original, reuse only the exact hardware or appropriate OEM replacement parts.

This hinge holder is the replacement bracket that secures the appliance door hinge assembly, restoring proper door alignment and stable opening/closing. Designed to replace a worn or broken hinge support and help prevent sagging or uneven sealing. What it does

• Supports and locates the door hinge assembly so the door opens and closes smoothly.
• Restores proper door alignment to improve seal and reduce gaps that can lead to leaks or temperature loss.
• Replaces cracked, bent, or broken hinge mounting points that cause door sag or misalignment.
• Works with the existing hinge pin and hardware to secure the door to the cabinet.

• One hinge holder bracket.

• High-level replacement: remove/remove trim or access panel as needed, unfasten hinge hardware, swap the old holder for the new one, then reassemble and check door alignment.
• Use the correct fasteners and torque per manufacturer guidance; do not overtighten plastic mounting points.
• Disconnect power (and water if applicable) and follow appliance-specific safety guidelines before starting.
• If the door remains misaligned after replacement, check hinge pins, mounting hardware, and surrounding brackets for wear.