Parts for Electrolux EI30GF55GSJ: 11 - Door Parts

This inner oven door glass replaces a cracked, broken or fogged inner door panel to restore thermal performance and visibility into the oven cavity. It helps keep heat in the oven and prevents direct exposure to the internal cavity. What it does:

• Replaces damaged or cracked inner oven door glass that can compromise heating and safety
• Restores the oven door's insulating layer to reduce heat loss and improve cooking consistency
• Provides a clear viewing window to check food without opening the door
• Stops rattling or vibration caused by loose or broken glass

• Disconnect power to the appliance and ensure the oven is completely cool before starting
• Wear cut-resistant gloves and eye protection when handling glass to avoid injury
• Some installations require removing the oven door and disassembling door screws or clips; keep fasteners organized

This replacement door gasket seals the refrigerator door to help maintain proper cooling and reduce air leaks. It restores a tight seal to help prevent temperature fluctuations and excess energy use. What it does:

• Forms an airtight seal around the refrigerator door to keep cold air inside
• Helps reduce frost buildup and warm spots caused by a failing seal
• Can improve cooling consistency and reduce compressor run-time when worn gaskets are replaced
• Fits into the door channel and compresses to close gaps between the door and cabinet

• Disconnect power to the appliance before starting any work
• Clean the door channel thoroughly and remove old gasket before installing the new one
• Warm the gasket to improve flexibility for easier installation; avoid open flames or high-heat tools
• Press gasket fully into the channel and check for even compression around the entire door; trim only if the manufacturer explicitly states trimming is required

This factory replacement plate is used on Frigidaire-made cooking appliances to cover and support a specific area of the unit. Replacing a bent or missing plate restores proper protection, alignment, and a clean, finished appearance. What it does

• Covers an opening or shields internal components as designed for the model
• Provides a stable mounting surface for adjacent parts or hardware
• Helps prevent debris intrusion and potential rattles or vibration
• Common signs it's needed: plate is missing, bent, cracked, or won't fasten securely

• 1 plate

• Disconnect power (and gas, if applicable) and allow the appliance to cool before servicing
• Retain and reuse existing screws/fasteners unless your model specifies new hardware
• Align the plate with existing holes; start screws by hand to avoid cross-threading and tighten evenly
• Verify clearances and safe operation before restoring power

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

Size: 3/4 inch od x 1/4 inch id.

The Screw is an OEM replacement part for Frigidaire appliances. This screw is used to securely fasten components, such as panels, brackets, or internal parts, ensuring the appliance remains stable and functions correctly. Its precise design ensures a snug fit and reliable performance in the designated area of the appliance.

Over time, screws can become stripped, corroded, or loosened due to vibrations, frequent use, or environmental factors. A damaged or missing screw may lead to instability, misaligned components, or operational issues with the appliance.

Symptoms of a bad or missing screw include:

• Loose or misaligned panels or components
• Rattling or unusual noises during operation
• Difficulty in securing parts during repairs or adjustments
• Parts becoming detached or unstable

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This is a replacement rating/nameplate label that restores the appliance identification and safety information printed on the cabinet. It helps keep model, serial and electrical ratings readable for service and safe operation. What it does:

• Replaces a torn, faded or missing rating/nameplate so model and serial info is visible for service.
• Restores printed electrical ratings and manufacturer markings used during diagnostics.
• Helps meet safety and inspection needs by returning legible identification to the appliance.
• Simple peel-and-stick replacement—no tools required for the label itself.

• One replacement adhesive rating/nameplate label.

• Clean and dry the surface thoroughly before applying; remove old adhesive residue.
• Align the label carefully, peel backing, and press firmly from one edge to the other to avoid bubbles.
• Do not place over vents, controls or moving parts; ensure label location is the original flat area on the cabinet.
• This is a non-electrical cosmetic/identification part—no wiring or power disconnection is required to apply, but follow general safety precautions when working on appliances.

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.