Parts for Electrolux EI32AR80QSA: 02 - Door Parts

This is a gray magnetic door gasket that attaches around the perimeter of the freezer door to create an airtight seal when closed. It prevents warm air from entering the freezer compartment, helping maintain proper temperature and energy efficiency. Replace this gasket if you notice frost buildup inside the freezer, the door not sealing properly, or if the gasket is torn, cracked, or has lost its flexibility.

This is the interior plastic liner panel that forms the inside surface of the freezer door. It holds door shelves and bins in place while helping maintain an insulated barrier between the freezer compartment and the outside air. Replace this panel if it is cracked, warped, or damaged, which can lead to frost buildup, poor sealing, or difficulty keeping shelves securely attached.

The outer door panel is the exterior-facing surface of your appliance's door, forming the visible front of the door assembly. It provides the finished appearance of the door and acts as the outer protective layer for the internal door components. Replace this panel if it is dented, cracked, discolored, or otherwise cosmetically damaged and you want to restore your appliance's appearance.

The refrigerator nameplate displays model information, specifications, and regulatory compliance details, typically mounted on the interior wall or back panel. Replace when the nameplate becomes illegible, damaged, or detached, affecting warranty coverage or service identification.

Replacement door handle for refrigerators and freezers. Installs on the appliance door to restore a secure grip for opening and closing. Needed when broken.

Replacement screw for securing panels, brackets, and internal components in freezers and refrigerators. Use to replace missing or stripped hardware.

Replace your worn freezer door gasket to restore an airtight seal, prevent cold air loss, and reduce frost buildup. Confirm fit by model number.

Secures interior trim and panels in refrigerators and freezers. Replace when trim becomes loose or rattles. Confirm fit with your model number.

This clear plastic shelf door replaces a broken or cracked refrigerator door shelf/bin cover and restores a secure, visible storage pocket on the inside door. It keeps small items contained and helps maintain organized door storage. What it does:

• Replaces a damaged or cracked door shelf cover to stop items from falling out of the door pocket
• Provides a clear view of stored condiments, bottles, and small items for easy access
• Restores proper fit and alignment of the door storage area so items stay securely in place
• Helps prevent spills and keeps loose items from shifting during normal use

• One replacement clear plastic shelf door

• Remove all food and containers from the door before starting
• Usually snaps into place or mounts with simple clips; check for broken clips and line up tabs before pressing in
• Use a soft cloth and mild cleaner to remove fingerprints or debris after installation

This bin door is the hinged cover for a door storage bin. It restores a secure flip-down barrier that keeps items contained and helps prevent spills when you open or close the appliance door.

• Provides a flip-down cover for a door bin to retain items securely
• Pivots on side hinge points for easy access to contents
• Replaces cracked, warped, or missing covers that won't stay in place
• Common symptoms include broken tabs, loose fit, or items falling during door movement

• Disconnect power and empty the affected bin before starting
• Release the old cover from its side hinges/tabs; note orientation for reassembly
• Allow the new cover to reach room temperature; align with hinge points and snap into place without forcing
• Open and close the cover to confirm smooth pivot and secure engagement

Plastic plug insert for freezer door base. Covers screw holes or mounting points. Replace if cracked, missing, or worn to restore a clean appearance.

Replace a stripped, missing, or damaged set screw that secures refrigerator or freezer door handles. Requires 3/32" allen wrench for installation.

Secures door handle to refrigerator door. Replace if missing, stripped, rusted, or corroded from regular use. Essential hardware for handle installation.

Secures panels, brackets, handles, and trim inside your refrigerator. Replace missing, stripped, or damaged screws to eliminate rattling and looseness.

A replacement stainless-steel trim kit that restores the finished look around your appliance for a clean, built-in appearance. Helps cover gaps and damaged edges and keeps the front area looking uniform. What it does

• Replaces damaged or missing exterior trim pieces to improve appearance.
• Covers gaps between the appliance and surrounding cabinetry for a finished look.
• Helps maintain a consistent stainless-steel exterior finish.
• Commonly used when original trim is bent, scratched, or otherwise cosmetically worn.

• Designed for exterior attachment; your appliance's installation manual for exact placement and hardware requirements.
• Turn off power to the appliance (or follow manufacturer safety instructions) before starting work.
• Use proper tools and handle stainless panels carefully to avoid scratching the finish.
• If fasteners or additional trim supports are required, order separately.

Mounting nut anchor insert for freezers. Provides a secure threaded point in thin sheet metal for fastening panels or components. Replaces missing insert.

Replacement mounting screw for freezer panels and components. Needed when original fasteners are lost, stripped, or damaged to secure parts properly.

This is a service wrench used to loosen and tighten appliance fasteners for maintenance and repairs, making access and part replacement easier for technicians and DIYers. Durable tool designed for specific appliance fastener sizes. What it does:

• Provides the correct fit and leverage for removing or installing designated appliance nuts, bolts, and fittings
• Helps safely access internal components during service and part replacement
• Reduces risk of rounding fasteners compared with improvised tools
• Useful for routine maintenance tasks and repair procedures that require a dedicated wrench

• One wrench

• Use the wrench only for its intended appliance fasteners; avoid excessive force
• Disconnect power and water to the appliance before beginning service
• Wear safety gloves and eye protection when working on appliances

Replacement screw that secures brackets, shelves, trim, panels, and covers inside your appliance. Install when the original is missing, stripped, or corroded.

Secure door gaskets and interior trim on freezers and refrigerators. Replace broken or missing clips to maintain proper seal and temperature. Confirm fit.