Parts for Electrolux FPGH3077RFB: 06 - Door Parts

This flat replacement glass shelf provides a stable, easy-to-clean surface inside the refrigerator to help organize and protect food. It restores proper shelving where the original glass was cracked, scratched, or missing. What it does:

• Replaces a flat refrigerator shelf glass to support food items and containers
• Restores even storage surfaces and prevents spills from soaking shelves below
• Helps maintain refrigerator interior organization and visibility of contents
• Fits into existing shelf supports or trim rails when the original glass is damaged or removed

• One flat replacement glass shelf

• Handle the glass carefully and wear cut-resistant gloves to avoid injury
• Remove food and any trim/shelf supports before swapping the glass
• Place the new glass into the existing rails or supports; do not force or bend components
• If any clips, rails or seals are damaged, replace them before use to ensure proper fit and safety

A replacement 10-24 x 5/8 screw used to fasten interior and exterior appliance components. Simple, direct-fit hardware that restores secure mounting where a worn or missing machine screw is causing loose panels or trim. What it does:

• Secures panels, brackets, and trim pieces to prevent rattling and misalignment
• Replaces stripped, rusted, or lost screws that cause loose or vibrating parts
• Restores proper attachment for components that won't stay in place
• Works wherever a 10-24 x 5/8 machine screw is required

• One 10-24 x 5/8 screw

• Use the correct driver and steady pressure to avoid stripping the head or threads
• Tighten until snug; avoid over-tightening which can damage mating parts
• Disconnect power to the appliance before working on electrical or moving components
• Replace the receiving nut or insert as needed for a secure fit

This complete door assembly replaces a damaged or worn refrigerator door to restore proper sealing and appearance. It arrives fully assembled so you can swap the door and get the appliance functioning and closing correctly. What it does:

• Replaces the full outer door structure, restoring the cabinet seal and insulating barrier
• Helps stop cold air leaks that can cause ice build-up, frequent compressor cycles, or spoiled food
• Restores damaged trim, mounting points, and hinge interfaces needed for proper door alignment
• Provides a like-for-like replacement when the original door is dented, cracked, or warped

• Disconnect power and empty the door before starting; door assemblies can be heavy and awkward to handle
• Support the door during removal and installation to avoid damage to hinges or wiring
• Tighten hinge fasteners securely and check door alignment and gasket contact after installation
• If the door includes electrical components (lights, controls), verify connectors are fully seated before restoring power

Restore a safe, finished oven door with this replacement outer glass panel. It replaces a cracked or shattered front window, protecting the door assembly and letting you see your food without exposing insulation or sharp edges. What it does:

• Forms the front/outer pane of the oven door window
• Protects door insulation and inner glass from damage
• Helps contain heat within the oven when intact
• Common symptoms: visible cracks, shattered or missing pane, loose or rattling glass

• 1 outer oven door glass panel

• Disconnect power and allow the oven to cool completely before service
• Wear cut-resistant gloves and eye protection; glass edges can be sharp
• Removing the door from the hinges makes service easier; support the door to prevent damage
• Transfer any trim/brackets/nameplate from the old pane and reuse existing hardware as required

This hinge secures and guides a refrigerator door so it opens and closes smoothly and holds proper alignment. Replacing a worn hinge restores stable door operation and helps the gasket seal correctly. What it does:

• Provides a pivot point for the refrigerator door to open and close
• Keeps the door aligned so it seals properly and maintains interior temperature
• Replaces worn, bent, or damaged hinge hardware that can cause door sag or uneven gaps
• Reduces rubbing, binding, or noisy movement during door operation

• One hinge

• Unplug the appliance or disconnect power before starting work
• Support the door while removing or installing the hinge to prevent injury or damage
• Use the same mounting screws and positions; tighten hardware securely but avoid over-torquing
• Check door alignment and gasket sealing after installation; adjust hinge as needed per your model's service instructions

This replacement refrigerator door handle restores a secure grip and fresh appearance to a damaged or worn door. Designed to mount in the original location, it lets you open and close the door smoothly while matching the appliance's original fit. What it does:

• Provides a sturdy grip for opening and closing the refrigerator door.
• Replaces cracked, broken, loose or cosmetically damaged handles.
• Helps restore proper door operation by giving a solid attachment point for normal use.
• Matches original mounting points to align with the existing door hardware.

• Disconnect power or unplug the appliance before starting and work on a stable surface.
• Support the door while removing and reinstalling hardware to prevent it from shifting or falling.
• Use basic hand tools (screwdriver/socket) to remove existing fasteners; reuse original screws if undamaged.
• Tighten mounting screws securely but avoid over-torquing to prevent damage to the handle or door.

A small metal mounting bracket that secures and supports appliance components and panels for proper alignment and stability. Replaces a damaged or missing bracket to reduce movement and restore fit. What it does:

• Secures panels, trim, or internal components to the cabinet or frame
• Restores proper alignment
• Reduces rattling or vibration caused by a loose support
• Prevents further wear on adjoining parts by holding components steady

• One mounting bracket

• Disconnect power and/or water before beginning any repair
• Inspect adjacent fasteners and attachment points for damage; replace if needed
• Use appropriate screwdriver or socket; do not overtighten fasteners

This is a replacement screw used to secure appliance panels and components. It restores proper fastening so panels, trim, or assemblies stay tight and reduce vibration or rattling. What it does

• Fastens panels, brackets, or trim to the appliance chassis
• Helps stop loose or vibrating panels and trim pieces
• Restores proper alignment where a missing or stripped screw causes gaps or movement
• Use when the original screw is missing, damaged, or corroded

• One replacement screw as shown

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the screw head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Keep removed screws in a safe place; this screw matches the original before installation

This appliance screw fastens panels, brackets, and other components inside the unit. Replace a missing, rusty, or stripped fastener to restore a secure fit and help prevent rattles, misalignment, or premature wear.

• Secures appliance components such as panels, brackets, and covers
• Restores proper fit when an original screw is missing or stripped
• Helps reduce vibration and noise from loose parts
• Common signs: loose or misaligned parts, rattling, or a missing screw

• Disconnect power before servicing
• Match the new screw to the original for size and thread before installing
• Hand-start threads to avoid cross-threading; do not overtighten
• Reuse any original washers or clips if they were used with the old screw

This spacer sets the correct gap between mating parts in your appliance's assembly, preventing rubbing and misalignment. Replace a missing or worn spacer to restore a solid fit, reduce noise, and protect surrounding components.

• Maintains proper spacing between components for correct alignment and operation
• Reduces metal-to-metal contact, squeaks, and premature wear
• Helps fasteners and panels seat securely
• Typical symptoms when failed: loose or rattling parts, uneven gaps, or visible wear marks

• Disconnect power; for gas models, shut off the gas. Allow the appliance to cool completely.
• Access the assembly per your model's diagram; note the original orientation/stack-up before removal.
• Reuse original fasteners if serviceable; hand-start threads and tighten snugly to avoid damaging the spacer.
• Verify alignment and clearances before fully reassembling. Quantity and location vary by model.

This appliance screw fastens panels, brackets, and other components inside the unit. Replace a missing, rusty, or stripped fastener to restore a secure fit and help prevent rattles, misalignment, or premature wear.

• Secures appliance components such as panels, brackets, and covers
• Restores proper fit when an original screw is missing or stripped
• Helps reduce vibration and noise from loose parts
• Common signs: loose or misaligned parts, rattling, or a missing screw

• Disconnect power before servicing
• Match the new screw to the original for size and thread before installing
• Hand-start threads to avoid cross-threading; do not overtighten
• Reuse any original washers or clips if they were used with the old screw

Replacement screw that secures panels, trim and internal components in compatible appliances. Restores proper fit and helps reduce rattling or loose parts when the original fastener is missing, worn, or damaged. What it does:

• Fastens panels, brackets, trim pieces and small component assemblies to the appliance frame
• Helps eliminate noise and vibration caused by loose or missing fasteners
• Replaces stripped, corroded or missing screws to restore secure mounting
• Matches OEM fit when the identical screw is required for proper alignment

• Disconnect power to the appliance before starting any repair
• Use the correct driver size to avoid cam-out or damage to the screw head
• Do not overtighten; overtightening can strip threads or crack plastic parts

Size: 3/4 inch od x 1/4 inch id.