Parts for Frigidaire FFHT1835VB3: Door Parts

This gasket creates a tight seal between mating surfaces inside your appliance to prevent air or water leakage. Replacing a worn seal restores proper containment, helping the unit maintain performance, temperature control, and efficiency.

• Seals the joint between components to keep air and moisture from escaping or entering
• Helps the unit maintain stable temperatures and proper operation
• Replace if cracked, deformed, brittle, or no longer sealing
• Common symptoms: visible damage, leaks, condensation, or reduced performance due to poor sealing

• Disconnect power; shut off water supply if your repair involves any water connections
• Note the orientation of the original gasket before removal
• Clean and dry all mating surfaces; remove old adhesive or residue as needed
• After installation, run a quick test and check for leaks or gaps around the seal

This outer refrigerator door replaces a damaged or dented cabinet door to restore appearance and proper sealing. It provides the structural panel that mounts hinges, handles and the door gasket for normal operation and cooling performance. What it does:

• Replaces a damaged or dented outer refrigerator door panel
• Restores correct hinge alignment and door closing pressure
• Helps maintain proper internal temperature by supporting the gasket seal
• Prevents drafts, moisture intrusion and cosmetic blemishes

• Disconnect power and remove any food from door shelves before starting
• Door panels are heavy and may require two people to position and install
• Support the cabinet and follow OEM hinge/fastener order to avoid damage
• Check gasket condition and hinge fasteners after installation; adjust for proper seal

This door shelf bin restores usable storage on the inner door. Replace a cracked, broken, or missing bin to keep items organized and help prevent spills when opening and closing the door.

• Attaches to the door liner to hold food items and containers
• Replace if the original is cracked, warped, or has broken mounting tabs
• Common symptoms: bin falls off or won't stay seated, reduced door storage, items tipping or sliding
• Restores proper fit and organization on the door

• Empty the bin and support the door while working
• Remove the old bin by lifting up and out; align the new bin with the door rails and press down until fully seated
• Do not force; ensure you're installing in the correct door position for this bin
• No electrical work required; handle plastic parts carefully to avoid cracking

This replacement refrigerator bin restores safe, organized storage space inside your appliance. It securely holds bottles, jars, and small items so they don't tip, spill, or get lost—helping you maximize capacity and keep contents easy to reach. What it does:

• Provides contained storage for food and beverages in the designated compartment
• Attaches to molded supports/rails for stable, removable organization
• Replaces cracked or broken bins to restore usable space
• Common symptoms: stress cracks, broken tabs, bin won't stay seated, items falling or spilling

• 1 bin

• Remove contents, then lift the old bin up and out from its supports
• Align the new bin on the supports; slide or press down until fully seated
• Do not force or overload; verify placement and orientation per your model
• Minimize door-open time to maintain temperature; no electrical work required

This replacement door bin restores secure, organized storage on your refrigerator door, keeping bottles and condiments in place and easy to reach. It's a direct swap for a damaged or missing bin to keep items from tipping or falling.

• Mounts on the inner door as a shelf-style bin to hold jars, bottles, and small items
• Helps organize contents and maximize usable door space
• Replace if cracked, chipped, or the retaining tabs are broken
• Common symptoms: bin falls off, won't stay seated, or the original is missing

• Empty the old bin and lift straight up to release from the door tabs/rails
• Align the new bin with the slots/rails and press down until fully seated
• Do not force cold plastic; let it warm to room temperature to reduce cracking risk
• Avoid overloading the bin after installation

This bearing supports a rotating shaft within the appliance assembly, reducing friction for smooth, quiet operation. Replace a worn bearing to address grinding noise, wobble, or binding and to protect related components.

• Provides low-friction support for a rotating shaft or hub inside the assembly
• Helps maintain alignment for smooth, consistent rotation
• Reduces noise and wear from metal-on-metal contact
• Common failure signs: grinding/squealing, rough rotation, excess play/wobble, or intermittent binding

• Disconnect power; shut off water or gas before servicing
• Note orientation and any spacers/clips during disassembly to ensure correct reassembly
• Clean the shaft and housing; inspect mating parts and replace if worn or damaged
• Seat the bearing squarely using gentle, even pressure to avoid deforming the housing or shaft

This replacement cover is an access panel that protects internal components and restores the appliance's appearance. It keeps wiring and controls enclosed for safer operation and a clean look. What it does:

• Protects internal components and wiring from dust, debris, and accidental contact
• Restores the exterior appearance where the original cover was damaged or missing
• Helps maintain proper airflow and clearance around covered components
• Reduces risk of accidental contact with moving or electrical parts

• Basic hand tools typically required; disconnect power before starting
• Handle carefully to avoid scratching painted surfaces
• Inspect mounting tabs or fasteners and replace any damaged hardware as needed
• Follow for removal and reassembly procedures

This auto-closer hook mounts at the door hinge and engages the closer/cam to help pull the door shut for a reliable seal. Replace a worn or broken hook to restore smooth, consistent self-closing action. What it does

• Couples the door to the hinge's auto-closer/cam mechanism
• Helps the door finish closing and stay closed
• Reduces bounce-back so the gasket can seal properly
• Common symptoms: door won't self-close, pops back open, feels loose at the lower hinge, or the original hook is cracked/worn

• 1 auto-closer hook

• Disconnect power before servicing; support the door and use a helper if removing it from the hinge
• Access the lower hinge/closer area; remove the damaged hook and transfer any spacers or screws
• Install the new hook in the same orientation; tighten hardware securely
• Recheck door alignment and inspect the mating cam/closer if issues persist

This factory screw secures interior or door components in your refrigerator so they stay tight and aligned. Replace missing, stripped, or corroded hardware to eliminate looseness and prevent parts from shifting or rattling during use.

• Fastens brackets, trim, rails, bins, or handles to the cabinet or door
• Restores a secure fit when the original screw is lost, damaged, or rusted
• Helps correct looseness, vibration, and rattling from unsecured parts
• Common symptoms: loose or wobbling handle/trim, misaligned parts, missing hardware

• Disconnect power to the appliance before servicing; turn off water if working near dispenser/ice areas
• Match to the original hardware and install in the same location; reuse any washers/spacers
• Start threads by hand to prevent cross-threading; use the correct driver bit
• Tighten snugly—do not overtighten to avoid stripping threads or cracking plastic