Parts for Frigidaire FPEW3077RFF: Door Parts

This flat replacement glass shelf provides a stable, easy-to-clean surface inside the refrigerator to help organize and protect food. It restores proper shelving where the original glass was cracked, scratched, or missing. What it does:

• Replaces a flat refrigerator shelf glass to support food items and containers
• Restores even storage surfaces and prevents spills from soaking shelves below
• Helps maintain refrigerator interior organization and visibility of contents
• Fits into existing shelf supports or trim rails when the original glass is damaged or removed

• One flat replacement glass shelf

• Handle the glass carefully and wear cut-resistant gloves to avoid injury
• Remove food and any trim/shelf supports before swapping the glass
• Place the new glass into the existing rails or supports; do not force or bend components
• If any clips, rails or seals are damaged, replace them before use to ensure proper fit and safety

A replacement 10-24 x 5/8 screw used to fasten interior and exterior appliance components. Simple, direct-fit hardware that restores secure mounting where a worn or missing machine screw is causing loose panels or trim. What it does:

• Secures panels, brackets, and trim pieces to prevent rattling and misalignment
• Replaces stripped, rusted, or lost screws that cause loose or vibrating parts
• Restores proper attachment for components that won't stay in place
• Works wherever a 10-24 x 5/8 machine screw is required

• One 10-24 x 5/8 screw

• Use the correct driver and steady pressure to avoid stripping the head or threads
• Tighten until snug; avoid over-tightening which can damage mating parts
• Disconnect power to the appliance before working on electrical or moving components
• Replace the receiving nut or insert as needed for a secure fit

This complete door assembly replaces a damaged or worn refrigerator door to restore proper sealing and appearance. It arrives fully assembled so you can swap the door and get the appliance functioning and closing correctly. What it does:

• Replaces the full outer door structure, restoring the cabinet seal and insulating barrier
• Helps stop cold air leaks that can cause ice build-up, frequent compressor cycles, or spoiled food
• Restores damaged trim, mounting points, and hinge interfaces needed for proper door alignment
• Provides a like-for-like replacement when the original door is dented, cracked, or warped

• Disconnect power and empty the door before starting; door assemblies can be heavy and awkward to handle
• Support the door during removal and installation to avoid damage to hinges or wiring
• Tighten hinge fasteners securely and check door alignment and gasket contact after installation
• If the door includes electrical components (lights, controls), verify connectors are fully seated before restoring power

This metal door hinge replaces a worn or damaged refrigerator door pivot to restore smooth opening and proper door alignment. It helps keep the door secure and prevents sagging, rubbing, or uneven sealing. What it does:

• Provides a stable pivot point so the refrigerator door opens and closes correctly
• Restores proper door alignment to improve sealing and cooling performance
• Stops door sagging or rubbing on the cabinet edge
• Reduces noise from a loose or worn hinge

• One hinge

• Unplug the appliance and remove food/obstructions from the door area before starting
• Support the door while removing and installing the hinge to prevent drops or damage
• Reuse original fasteners unless replacements are specified by the manufacturer
• If the door has glass or heavy components, get a second person to help for safety

This replacement refrigerator door handle restores a secure grip and fresh appearance to a damaged or worn door. Designed to mount in the original location, it lets you open and close the door smoothly while matching the appliance's original fit. What it does:

• Provides a sturdy grip for opening and closing the refrigerator door.
• Replaces cracked, broken, loose or cosmetically damaged handles.
• Helps restore proper door operation by giving a solid attachment point for normal use.
• Matches original mounting points to align with the existing door hardware.

• Disconnect power or unplug the appliance before starting and work on a stable surface.
• Support the door while removing and reinstalling hardware to prevent it from shifting or falling.
• Use basic hand tools (screwdriver/socket) to remove existing fasteners; reuse original screws if undamaged.
• Tighten mounting screws securely but avoid over-torquing to prevent damage to the handle or door.

This appliance screw fastens panels, brackets, and other components inside the unit. Replace a missing, rusty, or stripped fastener to restore a secure fit and help prevent rattles, misalignment, or premature wear.

• Secures appliance components such as panels, brackets, and covers
• Restores proper fit when an original screw is missing or stripped
• Helps reduce vibration and noise from loose parts
• Common signs: loose or misaligned parts, rattling, or a missing screw

• Disconnect power before servicing
• Match the new screw to the original for size and thread before installing
• Hand-start threads to avoid cross-threading; do not overtighten
• Reuse any original washers or clips if they were used with the old screw

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

Replacement screw that secures panels, trim and internal components in compatible appliances. Restores proper fit and helps reduce rattling or loose parts when the original fastener is missing, worn, or damaged. What it does:

• Fastens panels, brackets, trim pieces and small component assemblies to the appliance frame
• Helps eliminate noise and vibration caused by loose or missing fasteners
• Replaces stripped, corroded or missing screws to restore secure mounting
• Matches OEM fit when the identical screw is required for proper alignment

• Disconnect power to the appliance before starting any repair
• Use the correct driver size to avoid cam-out or damage to the screw head
• Do not overtighten; overtightening can strip threads or crack plastic parts

The Screw is an OEM part for Frigidaire ranges and ovens. This part is designed to securely fasten various parts of the appliance, ensuring stability and durability. 

Over time, screws can become loose due to the expansion and contraction of materials with temperature changes. Regular use and the occasional necessary removal for repairs or cleaning can also wear down the threads, making them less effective.  

Symptoms of a bad Screw (Chrome) include:

• Loose or wobbly components that should be securely fastened.
• Difficulty in securing parts due to stripped or damaged screw threads.
• Visible corrosion or deterioration of the screw.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Size: 8-18 x 0.5 inch. Color: Chrome.

Size: 3/4 inch od x 1/4 inch id.