Parts for Ge XUF14SMRCWW: Door Parts

This door gasket seals the washer door to help prevent leaks and keep water inside the tub during cycles. It restores a tight seal for smoother operation and helps maintain cleaning performance. What it does:

• Creates a watertight seal between the washer door and tub to prevent leaks.
• Helps keep laundry contained and reduces water escaping during wash and spin.
• Replaces worn, torn, or deformed seals that can cause visible leaking or water on the floor.
• Reduces musty odors caused by trapped moisture when a damaged seal is replaced.

• Disconnect power and shut off the water supply before starting any repair.
• Access may require removing the washer front panel or door trim; follow manufacturer instructions.
• Inspect the seal seat for residue or damage and clean before installing the new gasket.
• Use proper clamps or retaining band as required by the model; ensure the gasket is seated evenly to avoid leaks.

The User Interface Control Board and Panel is an OEM replacement part for GE freezers. It is responsible for providing a user-friendly interface that allows you to easily set and adjust the temperature settings of your freezer. It allows you to conveniently monitor and control the temperature inside your freezer, ensuring your food stays fresh and frozen.

A bad user interface control board and panel can occur due to electrical issues, component failure, or damage to the panel or buttons. If you notice symptoms such as the display not lighting up, unresponsive buttons, or incorrect temperature readings, it may indicate a need to replace the control board and panel.

Symptoms of a bad user interface control board and panel include:

• Display not lighting up
• Unresponsive buttons
• Incorrect temperature readings

Restore your freezer by replacing the faulty user interface control board and panel with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Fastener Door Handle is an OEM component specifically designed for GE refrigerators. It securely attaches the refrigerator door handle in place.

Located on the exterior refrigerator door, this fastener provides the mounting point for the handle through a sturdy mechanical connection. Proper fastening of the handle is necessary for its smooth operation and to withstand regular opening/closing.

Causes of a failed fastener can include wear and tear from years of use or stripped threads due to over-tightening.

Symptoms include:

• Loose, unstable, or detached door handle
• Difficulty opening/closing the refrigerator door
• Visible damage or corrosion of fastener head/threads

This genuine OEM GE replacement ensures the handle remains reliably affixed during normal operation. Compatible alternatives include select Hotpoint, RCA, or Kenmore.

The Freezer Door Handle is an OEM part for GE refrigerators. This door handle is designed to provide a sturdy and reliable way to open your freezer door. It allows you to effortlessly open and close the freezer door, providing a comfortable grip for everyday use.

A bad freezer door handle can occur due to wear and tear, accidental damage, or other factors. If you notice symptoms such as a loose or broken handle, difficulty in opening or closing the freezer door, or an unsightly appearance, it may be time to replace the handle.

Symptoms of a bad freezer door handle include:

• Loose or broken handle
• Difficulty in opening or closing the freezer door
• Scratched or worn-out appearance

Restore the function of your GE freezer by replacing the faulty door handle with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This is a genuine replacement screw used to secure appliance panels and components. It restores proper fastening to reduce vibration and keep parts aligned for safe, reliable operation. What it does:

• Secures panels, trim, brackets or internal components to prevent loosening
• Helps stop rattling, vibration, or misalignment caused by missing or worn fasteners
• Replaces stripped or corroded screws to maintain safe assembly
• Works wherever the matching screw size and thread are required

• Turn slowly to avoid cross-threading; use the correct screwdriver or bit
• Do not overtighten—tighten until snug and parts are properly seated
• Disconnect power and follow appliance safety guidance when accessing internal components

This lower door bin is a replacement refrigerator door shelf that restores lower-door storage and keeps bottles, condiments and small items secure and organized. Durable molded plastic replaces cracked or broken original bins. What it does:

• Provides a storage shelf on the lower section of the refrigerator door for bottles, jars and other items
• Replaces a cracked, chipped or broken door bin that no longer holds items securely
• Restores proper fit and prevents items from falling when the door is opened or closed
• Matches OEM shape for a snap-in fit with original mounting locations

• Remove all contents from the door and lift out the old bin; align tabs with door openings and snap new bin into place
• No special tools typically required; use a flat screwdriver only if needed to release retaining clips carefully
• Wear gloves to protect hands from sharp edges and broken plastic

This upper door bin is a factory-style replacement shelf that restores storage on the refrigerator door, keeping bottles and small items secure and organized. Durable plastic construction matches original fit and function. What it does:

• Provides a stable shelf on the upper section of the refrigerator door for bottles, condiments and small containers
• Replaces a cracked, chipped or broken door bin that no longer holds items securely
• Restores proper storage layout so door items don't shift or fall when opened
• Fits the upper door bin location and uses the factory mounting points for a secure fit

• Remove all items from the door and lift out the old bin; most installations are a simple snap-in replacement
• Some models may require loosening adjacent bins or a screwdriver—your model-specific instructions before starting
• Handle with care to avoid cracking the new bin during installation

The Key Set is an OEM part for GE refrigerators that includes the necessary keys to unlock and secure your refrigerator door. 

A bad key set can be caused by misplacement, loss, or damage to the keys themselves. If you find yourself unable to access certain compartments or features because of a missing or damaged key, it may be time to replace the key set.

Symptoms of a bad key set include:

• Inability to unlock or lock 
• Keys that are bent, broken, or no longer fit into the locks
• Keys that have been misplaced or lost

Replace your missing or damaged key set with this genuine OEM part to regain control over your refrigerator. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

A replacement badge nameplate that restores the exterior appearance of your appliance by covering the brand/name area. Keeps the unit looking finished and professional after repairs or panel replacement. What it does

• Replaces a missing, cracked or faded nameplate badge to restore the appliance's exterior appearance.
• Provides the visible brand/name emblem usually mounted on the control panel or door.
• Helps hide mounting holes or blemishes left from previous badge removal.
• Common symptom: visible missing or damaged emblem that affects the appliance's look.

• Inspect the old badge to determine if clips, screws or adhesive secure the replacement; transfer any reusable fasteners.
• Clean the mounting surface before installing to ensure good adhesion or clip engagement.
• Use appropriate hand tools; avoid forcing tabs or clips to prevent panel damage.