Parts for Ge ZTS90DSSN2SS: Door Parts

This door insulation retainer is a small plastic clip that secures insulation inside a refrigerator/freezer door to help maintain proper temperature and reduce noise. It replaces worn or missing retainers to keep the door liner insulation in place. What it does:

• Secures the door insulation to the inner door liner so insulation stays positioned
• Helps prevent insulation from shifting or sagging that can affect door seal performance
• Commonly used when insulation falls out or the liner shows gaps around the insulation
• Works as a direct-fit replacement for the original retainer designed for the door assembly

• One door insulation retainer clip

• Installation generally requires removing the door panel or liner; keep track of fasteners and trim
• Handle the door liner and insulation carefully to avoid damage or tearing the insulation
• Use proper tools and disconnect power if working near electrical components or lights
• Replace all affected clips for an even, secure fit

A replacement liner support that secures the refrigerator cabinet liner and keeps interior trim and panels aligned for a proper seal and appearance. Restores stability to cracked or broken support points. What it does:

• Holds the cabinet liner and interior trim in position to prevent gaps and movement
• Helps maintain door seal alignment by keeping liner edges stable
• Reduces rattling or shifting caused by a damaged support
• Commonly replaced when liner pieces are cracked, broken, or loose

• One liner support

• Disconnect power to the appliance before beginning any repair
• Remove food, shelves, and trim pieces as needed to access the damaged support
• This part typically secures with clips or fasteners; inspect existing hardware and replace if necessary

This is a 30" stainless replacement handle without a logo for compatible GE appliances. It restores a secure grip and the appliance's original look when the original handle is cracked, bent, or missing. What it does:

• Replaces a damaged, bent or broken exterior door handle to restore safe opening and closing
• Provides a corrosion-resistant stainless finish that matches stainless appliance trim
• Fits the appliance mounting points for a factory-style appearance
• Helps eliminate wobble, looseness, or sharp edges from a broken handle

• Basic hand tools are usually required; support the door or drawer to prevent tipping while replacing the handle
• Keep mounting screws and trim pieces organized during removal to ensure correct reassembly
• If screws are stripped or fasteners are damaged, replace them before completing installation
• Disconnect power or follow manufacturer safety guidance if working near electrical components

This door liner plug snaps into the inner door liner to cover fastener or access holes. It restores a clean, finished look and helps keep grease and debris from entering the door assembly.

• Covers exposed holes in the inner door liner
• Replaces a missing, loose, or damaged plug/cap
• Helps protect the door cavity from splashes and debris
• Restores a neat, factory-finished appearance

• Disconnect power before servicing; for gas ranges, also shut off gas. Allow the appliance to cool completely.
• Open the door and gently pry out the old plug with a plastic trim tool or flat-blade screwdriver.
• Align and press the new plug into the liner until it seats flush.
• Support glass and follow the manufacturer's instructions.

The Window Pack Assembly is an OEM part for GE ovens. This component includes the oven door window and its associated parts, providing visibility into the oven cavity during cooking. It helps retain heat within the oven while allowing users to monitor the cooking process without opening the door.

Causes of a bad window pack assembly can include thermal stress from repeated heating and cooling, accidental impact, or general wear and tear. A damaged window can compromise the oven's efficiency and safety by allowing heat to escape.

Symptoms of a bad window pack assembly include:

• Cracks or damage to the window glass
• Heat escaping from the oven door
• Condensation or discoloration between the window panes
• Difficulty seeing through the window during cooking

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Set Screw is an OEM part for GE refrigerators. The set screw fits into the handle assembly, ensuring a tight and stable connection to the refrigerator door. This set screw is essential for preventing the door handle from becoming loose or coming off, which can affect the ease of opening and closing the refrigerator door. 

Causes of a malfunctioning Set Screw can vary. Normal wear and tear is a common issue, causing the screw to strip or loosen over time. Incorrect installation is another factor.  

Symptoms of a bad Set Screw include:

• A loose refrigerator door handle, which may wobble or detach partially from the door.
• Difficulty in opening or closing the refrigerator door due to a lack of secure grip.
• The need to frequently retighten the door handle.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This stop door is a replacement component used in the oven dehydrate function to help control airflow and temperature during low-heat drying cycles. Replacing a worn or broken stop door restores proper drying performance and cycle control. What it does

• Serves as the oven's dehydrate stop door, helping direct airflow for low-temperature drying
• Helps maintain stable conditions during dehydrate cycles so food dries evenly
• Common symptom: dehydrate cycles fail to dry food properly or produce uneven results
• Common symptom: cracked, warped, or missing stop door that interferes with airflow or closing

• One stop door

• Disconnect power to the appliance before attempting any repair
• Handle the part carefully to avoid bending or damaging mounting tabs
• Basic hand tools may be required; follow the oven's service manual for disassembly/reassembly steps