Parts for Whirlpool EV205NZTQ00: 04 - Door Parts

This white hinge sleeve cap covers and protects the exposed hinge bushing/pin area, providing a clean, finished look while helping keep debris out of the hinge mechanism.

• Covers the hinge sleeve to improve appearance and protect the hinge area
• Helps prevent dirt and moisture from entering the hinge bushing
• Common failure signs include a missing/broken cap or a loose cap that won't stay in place
• May be used on door hinge locations where a sleeve/bushing is present

• Unplug the appliance or shut off power before starting
• Open the door and support it if working near a hinge
• Gently pry off the old cap; press the new cap firmly onto the hinge sleeve
• Do not force—align carefully to avoid cracking the cap

This is a 33-inch non-gallon door shelf rail that secures refrigerator door bins and keeps stored items from falling out. It restores proper bin support and helps maintain neat, usable door storage. What it does:

• Replaces a cracked, broken or warped door shelf rail that no longer holds a door bin securely
• Keeps bottles, jars and other items contained on the refrigerator door shelf
• Prevents bins from shifting or dropping when the door is opened
• Matches the OEM fit for a direct replacement when the original rail is damaged

• Remove all items from the door bins before starting
• Many installations are snap-in or secured with a few screws; keep original fasteners
• Handle carefully to avoid scratching the door or damaging the bin

This door stop replaces the worn or broken stop that limits door travel and keeps the door aligned for smooth opening and closing. Restores proper door positioning to prevent over-travel and edge wear. What it does:

• Acts as the mechanical stop that limits the door's range of motion
• Helps keep the door aligned and prevents the door from swinging past the designed stop
• Reduces stress on hinges and adjacent trim from over-travel
• Commonly replaced when the door binds, catches, or does not sit flush

What's included:

• One door stop (stop-door) as shown

Install notes:

• Disconnect power and follow the appliance manufacturer's safety instructions before servicing
• Removal typically requires basic hand tools; keep fasteners for reassembly
• Inspect surrounding hinge and trim for wear; replace as needed

This vent plug seals the designated vent port on the appliance assembly to maintain the intended seal and containment. Replacing a worn or missing plug helps prevent nuisance leaks and odors from an open or damaged vent.

• Seals a factory vent opening on the specified assembly
• Helps prevent moisture or drips from escaping at the vent area
• Helps keep dust and debris from entering through an open port
• Replace if the plug is cracked, hardened, shrunken, loose, or missing
• Typical signs include moisture around the vent, visible damage, or a plug that won't stay seated

• Disconnect power and shut off water or gas supplies (as applicable) before servicing
• Allow appliance surfaces to cool and dry; wear protective gloves
• Remove the old plug, clean the vent port, and press the new plug fully flush in the same orientation
• Restore power and run a brief test; inspect the vent area for leaks

This part is a genuine OEM door gasket manufactured by Whirlpool for use with various freezer models. This door gasket ensures that there is a proper seal around the freezer door, preventing hot air from entering and cold air from exiting to make sure the appliance can stay at the proper temperature. If the user notices the freezer is struggling to remain cold or sees visible tears or rips in the gasket, it will need to be immediately replaced. To help replace this part, smooth out any creases and soak the gasket in warm water prior to attempting to fit it into place. Make sure perishable foods are safely stored before turning off the freezer or keeping the door open while replacing the gasket.This door gasket is compatible with various freezer models that have been manufactured by Whirlpool, Maytag, Amana, and some others. This part is sold individually and is manufactured from high-quality, durable, non-corrosive materials.

This replacement handle clip secures a cabinet or door handle to the appliance, restoring a firm fit and preventing a loose or sagging handle. Simple part that helps the handle stay aligned and usable. What it does:

• Secures the appliance handle to the door/frame so the handle stays fixed during normal use.
• Replaces a broken, cracked or missing clip that lets the handle wobble or detach.
• Stops symptoms like a loose, wobbly or slipping handle and restores proper handle alignment.
• Small plastic/metal retainer designed to snap into the handle or door bracket.

• Disconnect power or unplug the appliance before starting any repair to avoid injury.
• Remove the old clip by releasing the handle and prying the clip out with a flat screwdriver or needle-nose pliers.
• Press the new clip into the handle or bracket until it snaps into place; verify the handle is secure and aligned.

This replacement screw secures appliance panels, brackets, and components. Using the correct size restores a snug fit to reduce vibration, prevent loosening, and keep assemblies properly aligned during operation. What it does:

• Fastens sheet metal and component brackets in designated locations
• Replaces missing, stripped, or corroded hardware
• Helps eliminate rattling and vibration from loose panels
• Maintains proper alignment of covers and assemblies

• 1 screw

• Disconnect electrical power; shut off water or gas supplies if applicable
• Match length/thread to the original; replace one fastener at a time to preserve alignment
• Start by hand to avoid cross-threading; use the correct driver size
• Snug firmly but do not overtighten to prevent stripping

This replacement screw fastens specified components in your appliance, restoring a secure fit. Replace stripped or missing hardware to stop vibration and keep panels, brackets, or handles properly aligned so the unit operates as intended.

• Secures panels, brackets, or assemblies to the frame or mounting points
• Helps maintain alignment and reduces rattling or vibration
• Replaces hardware with stripped threads or damaged heads
• Common signs it's needed: loose or missing screw, misaligned panel, rattling during operation

• Disconnect power; shut off water supply
• Use the correct driver/bit; start threads by hand to avoid cross-threading
• Tighten snugly without overtightening to prevent stripping or cracking
• Match the original screw's location and length per the parts diagram

This door stop replaces the worn or broken stop that limits door travel and keeps the door aligned for smooth opening and closing. Restores proper door positioning to prevent over-travel and edge wear. What it does:

• Acts as the mechanical stop that limits the door's range of motion
• Helps keep the door aligned and prevents the door from swinging past the designed stop
• Reduces stress on hinges and adjacent trim from over-travel
• Commonly replaced when the door binds, catches, or does not sit flush

What's included:

• One door stop (stop-door) as shown

Install notes:

• Disconnect power and follow the appliance manufacturer's safety instructions before servicing
• Removal typically requires basic hand tools; keep fasteners for reassembly
• Inspect surrounding hinge and trim for wear; replace as needed

This clear replacement door shelf bin restores door storage and visibility in your refrigerator, keeping bottles, jars and condiments organized and easy to see. Ideal for replacing cracked, cloudy or broken door bins. What it does:

• Provides a secure shelf on the refrigerator door to hold bottles, jars and other small items
• Restores visibility with a clear design so contents are easy to identify
• Replaces cracked, chipped or cloudy bins that no longer hold items securely
• Helps prevent items from falling when the door is opened or closed

• One clear door shelf bin

• Remove all items from the door before installing
• Align the bin hooks with the door rail and snap into place; do not force
• Inspect mounting tabs for damage and replace if broken
• Wear gloves to avoid cuts on damaged plastic and dispose of broken parts safely