Parts for Frigidaire FFHI1835VS0: Doors Parts

This stainless steel freezer door kit replaces a damaged or dented freezer door to restore your freezer's appearance and help maintain a proper seal. Designed as a direct-fit replacement for compatible models. What it does:

• Replaces a scratched, dented or corroded freezer door surface
• Restores proper door alignment and helps maintain interior temperature
• Improves appliance appearance with a stainless steel finish
• Stops drafts and reduces moisture buildup caused by damaged doors

• Disconnect power to the appliance before beginning any repairs
• Installation may require removing the hinge pins and lifting the old door off; two people can help handle the door safely
• Handle and hinge hardware may need transfer from the old door
• Follow model-specific instructions and use proper tools to avoid damage

Color: Grey

The Gasket is an OEM part for Frigidaire refrigerators. It is designed to create a secure seal around the refrigerator or freezer door, maintaining the internal temperature and preventing warm air from entering.

Causes of a bad gasket can include general wear and tear, frequent door openings that stress the gasket, exposure to food spills or harsh cleaning chemicals, or damage from improper handling or accidental impact.

Symptoms of a bad gasket include:

• The refrigerator or freezer door not sealing properly
• Warm air entering the appliance, causing temperature fluctuations
• Increased frost or condensation buildup inside the unit
• Higher energy bills due to the appliance working harder to maintain temperature

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Color: Grey

This replacement door kit restores a damaged or worn appliance door so it closes securely and looks like new. It's an exact-fit repair part designed to return proper door function and help prevent leaks, drafts, or heat loss. What it does

• Replaces a cracked, dented, or otherwise damaged door to restore appearance and operation
• Restores proper door closing and sealing to reduce leaks, drafts, or temperature loss
• Corrects alignment issues caused by bent or worn door components
• Stops rattling or movement caused by broken or missing door parts
• Helps ensure latches and hinges engage as intended for safe use

• One door kit

• Disconnect power and/or gas and follow the appliance manufacturer's safety instructions before beginning
• Use basic hand tools; support the door during removal to avoid dropping or damage
• Inspect surrounding seals, hinges, and latch for wear and replace if needed for best results

This door shelf bin restores usable storage on the inner door. Replace a cracked, broken, or missing bin to keep items organized and help prevent spills when opening and closing the door.

• Attaches to the door liner to hold food items and containers
• Replace if the original is cracked, warped, or has broken mounting tabs
• Common symptoms: bin falls off or won't stay seated, reduced door storage, items tipping or sliding
• Restores proper fit and organization on the door

• Empty the bin and support the door while working
• Remove the old bin by lifting up and out; align the new bin with the door rails and press down until fully seated
• Do not force; ensure you're installing in the correct door position for this bin
• No electrical work required; handle plastic parts carefully to avoid cracking

This replacement refrigerator bin restores safe, organized storage space inside your appliance. It securely holds bottles, jars, and small items so they don't tip, spill, or get lost—helping you maximize capacity and keep contents easy to reach. What it does:

• Provides contained storage for food and beverages in the designated compartment
• Attaches to molded supports/rails for stable, removable organization
• Replaces cracked or broken bins to restore usable space
• Common symptoms: stress cracks, broken tabs, bin won't stay seated, items falling or spilling

• 1 bin

• Remove contents, then lift the old bin up and out from its supports
• Align the new bin on the supports; slide or press down until fully seated
• Do not force or overload; verify placement and orientation per your model
• Minimize door-open time to maintain temperature; no electrical work required

This replacement door bin restores secure, organized storage on your refrigerator door, keeping bottles and condiments in place and easy to reach. It's a direct swap for a damaged or missing bin to keep items from tipping or falling.

• Mounts on the inner door as a shelf-style bin to hold jars, bottles, and small items
• Helps organize contents and maximize usable door space
• Replace if cracked, chipped, or the retaining tabs are broken
• Common symptoms: bin falls off, won't stay seated, or the original is missing

• Empty the old bin and lift straight up to release from the door tabs/rails
• Align the new bin with the slots/rails and press down until fully seated
• Do not force cold plastic; let it warm to room temperature to reduce cracking risk
• Avoid overloading the bin after installation

This bearing supports and allows smooth rotation of the dryer drum, helping reduce noise and wear. Replacing a worn bearing restores stable drum movement and helps prevent scraping, thumping, or drag during cycles.

• Supports the rear of the drum for proper alignment and smooth rotation
• Can help address squeaking, grinding, scraping, or thumping sounds
• Reduce drum wobble, drag, or intermittent stopping during operation
• Wear item that can degrade over time with heat and load stress

• Disconnect power before service and allow components to cool
• Access typically requires removing the top and front panels
• Inspect the drum shaft, support bracket, and glides for wear; replace if needed
• Apply manufacturer-approved high-temp lubricant where specified

The Hook is an OEM part for Frigidaire refrigerators. It helps to ensure a secure and proper closure of the refrigerator door.

A bad door closer hook can be caused by wear and tear, damage, or misalignment. Signs of a faulty door closer hook include the door not closing fully or not staying closed, difficulty in opening or closing the door smoothly, or a loose or wobbly door.

Symptoms of a bad door closer hook can include:

• The refrigerator door not sealing properly
• Excessive force required to open or close the door
• Visible damage or misalignment of the door closer hook

Replace your worn or damaged door closer hook with this genuine OEM part to restore your refrigerator door. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This factory screw secures interior or door components in your refrigerator so they stay tight and aligned. Replace missing, stripped, or corroded hardware to eliminate looseness and prevent parts from shifting or rattling during use.

• Fastens brackets, trim, rails, bins, or handles to the cabinet or door
• Restores a secure fit when the original screw is lost, damaged, or rusted
• Helps correct looseness, vibration, and rattling from unsecured parts
• Common symptoms: loose or wobbling handle/trim, misaligned parts, missing hardware

• Disconnect power to the appliance before servicing; turn off water if working near dispenser/ice areas
• Match to the original hardware and install in the same location; reuse any washers/spacers
• Start threads by hand to prevent cross-threading; use the correct driver bit
• Tighten snugly—do not overtighten to avoid stripping threads or cracking plastic